-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 51.971 | 51.990 | | | 51.936 | | | | OD 15 |(2.0461) |(2.0468) | | |(2.0447) | | | | | | | 0.010 | 0.059 | | | 0.129 | | | | | (0.0003)| (0.0023)| | |(0.0050)| | A | 52.000 | 52.030 | | | | 52.065 | | | ID 14 |(2.0472) |(2.0484) | | | |(2.0498) | | -------------------------------------------------------------------------------
Subtask 57-53-00-220-068-A
C. Dimensions of the Joint that Connects the Flap to the Carriage (Track 3).
(1) Do a check of the dimensions that follow:
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | A | 41.975 | 41.991 | | | 41.950 | | | | OD 17 |(1.6525) |(1.6531) | | |(1.6515) | | | | | | | 0.009 | 0.041 | | | 0.091 | | | | | (0.0003)| (0.0016)| | |(0.0035)| | A | 42.000 | 42.016 | | | | 42.041 | | | ID 16 |(1.6535) |(1.6541) | | | |(1.6551) | | -------------------------------------------------------------------------------
Subtask 57-53-00-220-069
D. Dimensions of the Joint that Connects the Flap to the Carriage (Track 4).
(1) Do a check of the dimensions that follow:
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 31.975 | 31.991 | | | 31.945 | | | | OD 21 |(1.2588) |(1.2594) | | |(1.2576) | | | | | | | 0.009 | 0.050 | | | 0.110 | | | | | (0.0003)| (0.0019)| | |(0.0043)| | B | 32.000 | 32.025 | | | | 32.055 | | | ID 19 |(1.2598) |(1.2608) | | | |(1.2620) | | -------------------------------------------------------------------------------
Subtask 57-53-00-220-070
E. Dimensions of the Joint that Connects the Flap to the Carriage (Track 4).
(1) Do a check of the dimensions that follow:
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 39.975 | 39.991 | | | 39.945 | | | | OD 19 |(1.5738) |(1.5744) | | |(1.5726) | | | | | | | 0.009 | 0.050 | | | 0.110 | | | | | (0.0003)| (0.0019)| | |(0.0043)| | B | 40.000 | 40.025 | | | | 40.055 | | | ID 18 |(1.5748) |(1.5757) | | | |(1.5769) | | -------------------------------------------------------------------------------
Subtask 57-53-00-220-071
F. Dimensions of the Joint that Connects the Flap to the Carriage (Track 4).
(1) Do a check of the dimensions that follow: -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 31.975 | 31.991 | | | 31.950 | | | | OD 21 |(1.2588) |(1.2594) | | |(1.2578) | | | | | | | 0.009 | 0.041 | | | 0.091 | | | | | (0.0003)| (0.0016)| | |(0.0035)| | B | 32.000 | 32.016 | | | | 32.041 | | | ID 20 |(1.2598) |(1.2604) | | | |(1.2614) | | -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼5(31)
