曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

A330/A340 FLEET DSC-22_20-50-10-25 P 56/124
FCOM 19 AUG 10
RUNWAYS/STORED RUNWAYS/NEW RUNWAY PAGES
Applicable to: ,
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-25 P 57/124
FCOM 19 AUG 10
SCHEMATIC
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-25 P 58/124
FCOM 19 AUG 10
RUNWAY PAGE
This page displays the following information :
[ 1L ] IDENT The runway ident, which comprises the airport identification and the
runway direction. It uses six or seven digits (CYYZ 24L and LFRJ 08, for
example).
[ 2L ] LAT/LONG The latitude and longitude of the runway threshold.
[ 4L ] LENGTH The runway length in meters (M) or feet (ft), in four digits (9 999 ft).
[ 5L ] ELV The elevation of the threshold in feet above sea level.
[ 6L ] CRS The runway course (degrees magnetic). T is displayed, if true North
referenced.
[ 1R ] LS IDENT The LOC, ILS or MLS identifier.
STORED RUNWAY PAGE
The pilot uses this page to display or delete runways defined and stored by the flight crew. The
stored runways are listed and numbered in the order in which they were inserted. The number is
displayed in the upper righthand corner of the page. (For example, 2/4 means the runway is the
second of four stored runways).
The pilot can delete any stored runway from the database by displaying its ident in the 1L field,
then pressing the CLR key on the MCDU control panel.
[ 6R ] DELETE ALL
and CONFIRM
DELETE ALL
The pilot presses this key to erase all the stored runways, except those
in use in the active or secondary flight plan. (The MCDU displays “F-PLN
ELEMENT RETAINED”).
[ 1L ] to [ 6L ] These fields are similar to RUNWAY page fields.
Note: When 10 runways are stored, entering a new stored runway deletes the first one of the
list (1/10).
NEW RUNWAY PAGE
The pilot can use this page to define and store up to 10 runways.
When the pilot enters an ILS/LOC ident in the [ 1R ] field, the new navaid page comes up. When
the pilot has entered the necessary data in the new navaid page and stored it, the new runway
page reappears.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-25 P 59/124
FCOM 19 AUG 10
The new runway page and the new navaid page (ILS/LOC) are not independent :
• When the flight crew defines the ILS/LOC first (on the new navaid page), the new runway page,
when called up, already displays the RWY course, RWY ident, and ILS ident (copied from the
new navaid page).
• When the flight crew defines the runway first (on the new runway page) the new navaid page,
when called up, already displays the ILS course, ILS ident, and runway ident.
The pilot must enter the two directions of a runway on two different new runway pages (LFRJ 08
and LFRJ 26, for example) to allow a flight plan to select either one.
[ 1L ] to [ 6L ] Enter information about the new runway.
[ 1R ] LS IDENT Enter the ILS/MLS/LOC ident. The NEW NAVAID page comes up.
[ 5R ] RETURN When displayed, pressing this key return to NEW NAVAID page.
[ 6R ] STORE This prompt appears only when all the amber boxes have been filled.
Note: The NEW RUNWAY may be used as departure or destination but no SID or STAR‐
can be associated or stored with this runway. Therefore the pilot will use it as an
“independent” airport.
A new runway is identified by the 4 letter ICAO airport identifier although all six or
seven digits must be entered.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-25 P 60/124
FCOM 19 AUG 10
ROUTE/STORED ROUTE/NEW ROUTE PAGES
Applicable to: ,
SCHEMATIC
ROUTE PAGES
(Not-modifiable)
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-25 P 61/124
FCOM 19 AUG 10
[ 1L ] CO RTE Any company route ident entered in this field causes all the elements of
the route to be displayed.
Line 2 to Line 6 These lines display the various route elements, including waypoints and
airways.
[ 1R ] FROM/TO This field is automatically filled when the pilot enters the ident for a
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 1(148)