曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

is not in the database, the new navaid page comes up. A “clear” action
reverts the selection to the autotuned navaid.
Line 2 CRS This line displays courses for the navaids on Line 1.
The pilot can manually enter the courses via these fields.
It displays “T”, if a tuned VOR is true North-referenced.
[ 3L ] ILS/FREQ This field displays the ILS ident and frequency. It is autotuned, if the ILS
is associated with the departure runway, or if the flight plan shows an
ILS approach selected for the destination. The ILS may also be entered
manually. When the manually-entered ILS differs from the ILS that would be
autotuned,
“RWY-ILS MISMATCH” appears.
[ 4L ] CRS This field displays the course associated with the ILS on Line 3. It
comes up automatically when an ILS is autotuned, or if an ILS has been
manually-tuned via its ident. Otherwise, the course must be entered
manually.
The course may be backbeam (Bxxx), or frontbeam (Fxxx).
[ 3R ] CHAN/MLS 　 The pilot manually tunes an MLS by its ident, or its channel. The system
automatically tunes the associated course and slope.
Note: If an MLS is tuned while an ILS was tuned, the ILS is deselected.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 104/116
FCOM 19 AUG 10
[ 4R ] SLOPE CRS 　 The pilots enters the slope and the course of the MLS in this field.
The course may be backbeam (Bxxx), or frontbeam (Fxxx). The field
displays “T”, if the MLS is true North-referenced.
[ 5L ] ADF1/FREQ
FREQ/ADF2
This line displays the identifier and frequency of ADFs 1 and 2.
The pilot can use the ident or the frequency to manually tune the ADF.
[ 6L ] ADF1/BFO
BFO/ADF2
When an ADF1 is selected, these fields display an ADF/BFO prompt. The
flight crew presses the key once to erase the arrow and put the ADF in BFO
mode. A clear action brings the arrow back and cancels BFO.
Note: The autotune function only works for navaids stored in the database.‐
When tuning manually, the operator should use the ident rather than the frequency,‐
unless the navaid is not in the database.
Manually tuned frequencies are displayed in large font.‐
SECONDARY PAGES
Applicable to:
GENERAL
The SEC F-PLN key on the MCDU console allows the flight crew to call up the secondary index
page and the secondary flight plan page. The secondary flight plan is generally for a diversion, for
predictable runway changes for takeoff or landing, or for training.
There are two types of secondary index pages. The type selected depends on the presence of a
secondary flight plan.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 105/116
FCOM 19 AUG 10
SECONDARY INDEX PAGE
A SECONDARY FLIGHT PLAN IS ALREADY DEFINED
[ 1L ] COPY ACTIVE
(blue)
The flight crew presses this key to copy the active flight plan into the
secondary flight plan and delete the previous secondary plan.
[ 2L ] SEC F-PLN
(white)
The flight crew presses this key to call up the secondary flight plan
pages.
[ 3L ] DELETE SEC
(blue)
The flight crew presses this key to delete the current secondary flight
plan.
[ 4L ] ACTIVATE SEC
(amber)
The flight crew presses this key to activate the secondary flight plan as
the active flight plan.
Note: “ACTIVATE SEC” appears routinely if the HDG/TRK mode is active. If the NAV mode
is active, “ACTIVATE SEC” appears only if the active and secondary flight plans have
a common active leg.
[ 1R ] INIT (white) This field displays this prompt when the secondary flight plan is not
defined as a copy of the active flight plan. Pressing this key calls up the
SEC INIT A and B pages.
[ 2R ] PERF (white) The flight crew presses this key to call up the performance pages for the
secondary flight plan.
[ 5R ] SEC F-PLN
PRINT
The flight crew presses this key to print the secondary flight plan report.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 106/116
FCOM 19 AUG 10
A SECONDARY FLIGHT PLAN IS NOT DEFINED
[ 1L ] COPY ACTIVE
(blue)
The flight crew presses this key to copy the active flight plan into the
secondary flight plan.
[ 2L ] SEC F-PLN
(white)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 1(129)