曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

[ 5L ] ELV This field gives the elevation of the navaid in feet above sea level. It is not
displayed for VOR or NDB.
[ 6L ] FIG OF MERIT This field shows how far out the FMGS can autotune a VOR, VOR/DME,
VORTAC, or DME for display or for computing position.
0 : up to 40 nm
1 : up to 70 nm
2 : up to 130 nm
3 : up to 250 nm
[ 1R ] STATION DEC
or RWY IDENT
This is the magnetic declination in the navaid area (used only for VOR,
VOR/DME, and VORTAC).
The field displays RWY IDENT if the navaid is a LOC, ILS, MLS, ILS/DME,
MLS/DME or ILS/TAC.
[ 2R ] CATEGORY This field shows the navaid's category if it is an ILS, ILS/DME, MLS,
MLS/DME or ILS/TAC. A LOC DME has a category = 0.
[ 3R ] COURSE This is the localizer course if the navaid is an ILS or a LOC. A “T” is added
if the course is true referenced.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 53/116
FCOM 19 AUG 10
[ 6R ] RETURN This prompt is displayed if the page has been accessed from the
SELECTED NAVAID page. The pilot presses this key to return to the
SELECTED NAVAID page.
STORED NAVAID PAGE
The pilot calls up this page by pressing the 2R key on the data index page.
He uses this page to display or delete navaids he has defined and stored.
A number in the upper right hand corner of the screen shows the relative order in which the
navaids were stored. (For example, 3/7 means third out of seven stored).
Slew keys give the pilot access to the different stored navaids.
[ 1L ] IDENT The pilot deletes a stored navaid by entering its ident in this field, then
pressing the CLR key at the bottom of the MCDU control panel.
[ 6R ] DELETE ALL
and CONFIRM
DELETE ALL
The pilot presses this key to erase all the stored navaids except those
currently in use in the active or secondary flight plan. (The MCDU displays
“F-PLN ELEMENT RETAINED.”).
NEW NAVAID PAGE
The pilot calls up this page by pressing the 5R key on the stored navaid page.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 54/116
FCOM 19 AUG 10
The pilot can use it to define and store up to 20 navaids. He must enter the navaid elements in two
steps :
1. Enter the data in the lines of amber boxes.
2. Enter frequency, elevation, figure of merit, and station declination or ILS category and course, if
applicable.
Note: The pilot cannot create an ILS/DME, MLS/DME or a non-colocated navaid.
If the runway associated with the ILS or MLS has been entered through the new runway
page, the course, ident, and runway ident are already displayed on the new navaid page
when it comes up (copied from the new runway page). Refer to 99 Duref Cible FCOM, for
details.
[ 1R ] STATION DEC The pilot must enter the magnetic declination if the prompt is displayed.
This prompt is displayed only for VOR, VORTAC or VOR/DME.
For a true referenced station, (polar area), enter OT or TO.
[ 3R ] COURSE If the navaid is an ILS, MLS, LOC, enter the course. Add a “T” for true
reference e.g. 120 °T.
[ 6R ] STORE This prompt appears when all the amber boxes are filled. The pilot presses
the key to store the navaid.
A stored navaid is never used for position computation.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 55/116
FCOM 19 AUG 10
RUNWAYS/STORED RUNWAYS/NEW RUNWAY PAGES
Applicable to:
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 56/116
FCOM 19 AUG 10
SCHEMATIC
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A330/A340 FLEET DSC-22_20-50-10-20 P 57/116
FCOM 19 AUG 10
RUNWAY PAGE
This page displays the following information :
[ 1L ] IDENT The runway ident, which comprises the airport identification and the
runway direction. It uses six or seven digits (CYYZ 24L and LFRJ 08, for
example).
[ 2L ] LAT/LONG The latitude and longitude of the runway threshold.
[ 4L ] LENGTH The runway length in meters (M) or feet (ft), in four digits (9 999 ft).
[ 5L ] ELV The elevation of the threshold in feet above sea level.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A330/A340機組操作手冊 FLIGHT CREW OPERATING MANUAL FCOM 1(113)