(2)
AMM 29-11-00/201, Main Hydraulic Supply System
(3)
AMM 32-00-30/201, Landing Gear Door Locks
(4)
AMM 32-32-14/401, Wing Gear Uplock Actuator
(5)
AIPC 32-32-08
B.
Access
(1)
Location Zone
755 Body Landing Gear, LH
765 Body Landing Gear, RH
C.
Prepare for the Removal
S 424-043
WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(1)
Install the ground locks in all landing gear (AMM 09-11-00/201).
(2)
Remove the pressure from hydraulic system 4 (AMM 29-11-00/201).
S 864-044
S 424-045
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASKS BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(3) Do this task: "Landing Gear Door Lock Installation" (AMM 32-00-30/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-32-09
ALL ú ú 01 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 864-047
(4)
Open these circuit breakers and attach DO-NOT-CLOSE tags:
(a)
P6, Main Power Distribution Panel
1) 6C28, ALT LG EXT NOSE
2) 6C31, ALT LG EXT BODY L
3) 6C32, ALT LG EXT BODY R
D.
Remove the Uplock Hook.
S 024-048
(1) Disconnect each end of the uplock actuator and move the actuator to the side (AMM 32-32-14/401).
NOTE: The uplock actuator remains in the plane. Do not remove the hydraulic lines.
S 024-049
WARNING:_______USE EXTREME CARE WHEN YOU REMOVE THE SPRINGS. SPRING TENSION CAN INJURE PERSONNEL OR DAMAGE PARTS.
(2)
Remove and discard cotter pin (15), remove nut (16), washer (14) and bolt (18). Move springs clear of hook (17). View A-A.
S 024-050
(3)
Remove and discard cotter pin (19), remove nut (20), washer (21), and bolt (22). Move link clear of hook (17). View B-B.
S 024-051
(4)
Remove and discard cotter pin (24), remove nut (25), washer (26), and pivot pin (6). Pull hook (17) out of assembly. View C-C.
TASK 32-32-09-404-052
3. Wing Landing Gear Uplock Hook Installation__________________________________________
A. References
(1)
AMM 09-11-00/201, Landing Gear Down Locks
(2)
AMM 29-11-00/201, Main Hydraulic Supply System
(3)
AMM 32-00-30/201, Landing Gear Door Locks
(4)
AMM 32-32-14/401, Wing Gear Uplock Actuator
(5)
AIPC 32-33-06, Fig. 1, AIPC 32-33-08, AIPC 32-33-14, Fig. 2
B.
Consumable Material
(1)
C00913 Corrosion Creventive Compound - BMS 3-27
(2)
D00633 Grease - BMS 3-33 (prefered)
(3)
D00013 Grease - MIL-G-23827 (optional)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-32-09
ALL ú ú 01 Page 402 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
FWD INBD
4. WASHER SEE C FWD
SEE B
3. NUT
A
2. COTTER PIN
5. WASHER
1. ACTUATOR
8. COTTER
PIN
1. ACTUATOR 7. NUT
6. UPLOCK ASSEMBLY
HOOK PIVOT PIN
12. WASHER
B 9. COUNTERSUNK
11. WASHER WASHER
10. BOLT
C
Wing Landing Gear Uplock Hook Installation 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 4(88)
