B B
Wing Landing Gear Door Actuator Adjustment
Figure 402 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-32-27
ALL ú ú 01 Page 405 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SAFETY VALVE
STOP
ASSEMBLY
DIFFERENTIAL SAFETY VALVE ASSEMBLY
Wing Landing Gear Door Actuator Adjustment
Figure 402 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-32-27
ALL ú ú 01 Page 406 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L10491
A
747-400 MAINTENANCE MANUAL
TASK 32-32-27-404-006
3. Wing Landing Gear Door Actuator Installation
____________________________________________
A. Consumable Materials
(1)
C00174 Compound-Corrosion Preventive - MIL-C-16173, Grade 3
B.
Parts
~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | Actuator | 32-32-27 | 01 | 55 | | | 2 | Nut | | | 50 | | | 3 | Washer | | | 30 | | | 4 | Bushing | | | 40 | | | 5 | Bolt | | | 10 | | | 6 | Washer | | | 20 | | | 7 | Washer | | | 25 | | | 8 | Washer | | | 35 | | | 9 | Release Lever | 32-36-08 | 01 | 190 | | | 10 | Bolt | | | 150 | | | 11 | Washer | | | 155 | | | 12 | Nut | | | 160 | | | 13 | Bushing | 32-32-27 | 01 | 45 | | | 14 | Bolt | | | 15 | | | 15 | Release Cam | 32-36-08 | 01 | 130 | | | 16 | Nut | | | 105 | | | 17 | Release Rod | | | 75 | | | 18 | Washer | | | 60 | | | 19 | Cotter Pin | | | 53 | | | 20 | Nut | | | 65 | | | 21 | Bolt | | | 55 | 2......…........…...................................…..........….....….........1
C. References
(1)
09-11-00/201, Towing
(2)
24-22-00/201, Manual Control
(3)
29-11-00/201, Main Hydraulic Supply System
(4)
32-00-30/201, Landing Gear Door Locks
(5)
32-12-00/501, Wing Gear Door
D.
Access
(1)
Location Zone
735 Wing Landing Gear, LH
745 Wing Landing Gear, RH
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-32-27
ALL ú
ú 01 Page 407 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
E. Procedure
S 864-007
(1) Move the ground release handle for the main landing gear to the UP position (Fig. 401).
NOTE: This moves the linkage for the safety module for the doors to
____ the position in Fig. 401. This also lifts the actuator release rod to permit the connection of the cam.
S 864-008
(2)
Make sure the dimension between the head end bolt and the spherical bearing on the structure is in the limits shown (Fig. 402).
S 424-009
(3)
Install the actuator (Fig. 401):
(a)
Install the actuator (1) in its position: 1) Install the clevis on the head of the actuator on the two sides of the lug on the structure.
2) Make sure the shaft of the actuator release lever is on the forward side of the actuator.
(b)
Install the nylon washers (6 and 7) between the structure lug and the clevis.
CAUTION:_______HOLD THE BOLT WHEN YOU TIGHTEN IT. IF YOU PERMIT THE BOLT TO TURN, IT CAN CAUSE DAMAGE TO THE CLEVIS LOCKING DEVICE.
(c)
Install the bushing (13) and the head end bolt (14).
NOTE: Install the head end bolt with the square head adjacent
____ to the milled flange of the clevis.
Do not lubricate the structural joints before or after you assemble the components.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機(jī)維護(hù)手冊(cè) 起落架 LANDING GEAR 4(102)
