(g)  
Install a plug in each open port.

 TASK 32-32-01-404-011
 3.  Wing Landing Gear Actuator Installation_______________________________________
 A. Special Tools and Equipment
 (1)  
ME65B01570 Wing Gear Retract Actuator Sling

 (2)  
MIT65B01204-1 Wing Landing Gear Walking Beam Bolt Removal Tool

 (3)  
PF51-009 - Fish Pole Hoist
 PF Industries Inc.
 3638 34th Avenue South
 Seattle, Washington 98144

 (4)  
ST2580-263 Retract Actuator Spacer Nut Torque Wrench Adapter

 (5)  
10PRE65B00161-1 Actuator to Wing Gear Attachment Bolt Protective Equipment (Thread Protector)

 B.
Consumable Materials

 (1)  
D00633 Grease - BMS 3-33 (preferred)

 (2)  
D00013 Grease - MIL-G-23827 (optional)

 (3)  
D00288 Lubricant - MCS 352 (Skydrol Assembly Lube)

 (4)  
D00196 Fluid-Hydraulic - BMS 3-11, Type IV, Class 1

 (5)  
C00174 Compound-Corrosion Preventive - MIL-C-16173, Grade 3

 (6)  
C00259 Enamel-Primer - BMS 10-11, Type I

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-32-01
 ALL  ú ú 01 Page 409 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 C.  Parts ~.................................................... | AMM | | AIPC | ............. ...................... | FIG| ITEM | NOMENCLATURE | SUBJECT| FIG |ITEM | .........................................|............ | 401| 1 | Actuator |32-32-01| 05 | 70 | | | 2 | Walking Beam |32-11-15| 02 |115 | | | 3 | Bolt | | | 20 | | | 4 | Tube Assembly |32-32-01| 05 | 60 | | | 5 | Attach Bolt |32-11-02| 02 | 30 | | | 6 | Clamp |32-32-01| 05 | 30 | | | 7 | Bolt | | | 10 | | | 8 | Clip Bolt Lug | | | 35 | | | 9 | Block Lug | | | 40 | | | 10 | Washer | | | 20 | | | 11 | Nut | | | 25 | | | 12 | Union | | | 55 | | | 13 | Nut | | | 50 | | | 14 | Clip | | | 65 | | | 15 | Bolt | | | 15 | | | 17 | Nut |32-11-15| 02 | 80 | | | 18 | Washer | | | 25 | | | 20 | Bolt | | | 55 | | | 21 | Washer |32-11-01| 01 | 45 | | | 22 | Washer | | | 40 | | | 23 | Spacer |32-11-15| 02 | 95 | | | 24 | Spacer Nut | | |105 | | | 25 | Threaded Spacer | | |100 | | | 26 | Wide Spacer | | |110 | | | 27 | Washer | | | 60 | | | 28 | Nut | | | 65 | | | 29 | Lube Insert | | | 85 | | | 31 | Lube Insert |32-11-02| 02 | 10 | | | 32 | Spacer |32-11-01| 01 | 90 | | | 33 | Washer | | | 95 | | | 34 | Sleeve |32-11-02| 02 | 45 | | | 35 | Nut | | | 25 | | | 36 | Washer | | | 20 | | | 37 | Nut | | | 40 | | | 38 | Washer | | | 35 | | | 39 | Lockbolt | | | 15 | 2....…......…...................…........….....….....1
 D.  References
 (1)
AMM 06-09-08/201, Wing Access Doors and Panels

 (2)
AMM 09-11-00/201, Towing

 (3)
AMM 12-21-01/301, Landing Gear

 (4)
AMM 29-11-00/201, Main Hydraulic Supply System

 (5)
AMM 32-00-30/201, Landing Gear Door Locks

 (6)
AMM 32-11-15/401, Wing Gear Walking Beam

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-32-01
 ALL  ú ú 01 Page 410 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 E. Access
 (1)  
Location Zone
 735 Wing Landing Gear, LH
 745 Wing Landing Gear, RH

 F.
Prepare for the Installation

 S 424-012
 (1)  
Install the tube assembly on the actuator with the used clip and clamps with new cushions, if it is necessary (Fig. 401):

 (a)  
Install the union reducer (12) and the nut (13) on the clip (14).

 (b)  
Install the clip (14) with the bolt (15), the clip bolt lug (8), the block lug (9), the washer (10), and the nut (11).

 (c)  
Hold the tube assembly (4) in its position.

 (d)  
Install the clamp (6) with the bolt (7), the clip bolt lug (8), the block lug (9), the washer (10), and the nut (11).

　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 4(63)