32-32-08
 ALL  ú ú 01 Page 404 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

LOCK/CLOSE
LOCK OPEN (ALTERNATE METHOD)
Uplock Actuating ToolFigure 402 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-32-08
 ALL  ú ú 01 Page 405 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 034-008
 (3)  
Disconnect the uplock sensor (AMM 32-61-21/201).

 S 034-046

 (4)  
Remove the clamps that connect the sensor conduit.

 S 034-045

 (5)  
Loosen the conduit nut at the junction box.

 S 014-044

 (6)  
Move the conduit away.

 S 024-009

 (7)  
Remove the uplock mechanism:

 (a)  
Remove the bolt that connects the link to the uplock mechanism.

 (b)  
Hold the uplock mechanism with the strap hoist.

 (c)  
Remove the two bolts that attach the mechanism to the uplock supports.

 (d)  
Remove the uplock mechanism from the airplane.

 TASK 32-32-08-404-010
 3.  Wing Landing Gear Uplock Mechanism Installation_______________________________________________
 A. Special Tools and Equipment
 (1)
30HME65B00161-950 Hoist, Landing Gear Uplock Assembly (Strap)

 B.
Consumable Materials

 (1)  
D00633 Grease - BMS 3-33 (preferred)

 (2)  
D00013 Grease - MIL-G-23827 (optional)

 C.
References

 (1)  
AMM 09-11-00/201, Towing

 (2)  
AMM 24-22-00/201, Manual Control

 (3)  
AMM 29-11-00/201, Main Hydraulic Supply System

 (4)  
AMM 32-00-30/201, Landing Gear Door Locks

 (5)  
AMM 32-32-06/401, Wing Gear Uplock-Operated Sequence Valve and Mechanism

 (6)  
AMM 32-32-14/401, Wing Gear Uplock Actuator

 (7)  
AMM 32-61-21/201, Wing Gear Uplock Sensors

 (8)  
AIPC 32-32-08, Fig. 1

 D.
Access

 (1)  
Location Zone
 135 Wing Landing Gear Well, LH
 136 Wing Landing Gear Well, RH

 E.
Procedure

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-32-08
 ALL  ú ú 01 Page 406 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 494-035 WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (1) Install the ground locks in all landing gear (AMM 09-11-00/201).
 S 494-036 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASKS BELOW TO INSTALL
_______
 THE DOOR LOCKS ON THE LANDING GEAR DOORS.  THE DOORS CAN CLOSE
 QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT. THIS
 (2)  Do this task: "Wing Landing Gear Door Lock Installation" (AMM 32-00-30/201).
 S 494-037
 (3)  Do this task: "Body Landing Gear Door Lock Installation" (AMM 32-00-30/201).
 S 424-011
 (4)  Install the uplock mechanism (Fig. 401): (a) Install the strap hoist on the uplock mechanism. (b) Put the uplock mechanism in the correct position on the uplock support. 1) Install the uplock mechanism with the clevis ends of the frame adjacent to the uplock supports on the structure. (c) Put the hydraulic tube support in the correct position with a flange in each clevis end of the frame. (d) Apply a layer of grease on the uplock attach bolts for the uplock mechanism. (e) Install the bolts with the bolt heads on the external side of the uplock support assembly.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 4(84)