D.
Prepare for Test
S 495-002
(1) Make sure that all ground lock pins on the nose and main landing gear are installed (AMM 09-11-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-00
ALL ú ú 01 Page 503 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 585-003
(2)
Jack airplane for gear retraction (AMM 07-11-01/201).
S 865-005
(3)
Make sure that the landing gear control lever is in the OFF
position.
S 865-006
(4)
Open circuit breakers as follows for applicable systems:
(a)
P7 Overhead Panel
1) 7A03 AURAL WARN L
2) 7A04 AURAL WARN R
S 865-007
(5)
Provide electrical power (AMM 24-22-00/201).
S 865-008
(6)
Make sure that the Engine Indication and Crew Alerting System (EICAS), Electronic Interface Unit (EIU) and Proximity Switch Electronic Unit (PSEU) are operational.
E.
Test Body Gear and Door Extension and Retraction System
S 865-009
(1)
Pressurize hydraulic systems No. 1 and 4 (AMM 29-11-00/201).
S 865-010
(2)
Make sure that all personnel are clear from all landing gear doors.
S 215-035
(3)
Make sure the GND TESTS switch on the P461 overhead panel is in the ENABLE position.
S 215-036
(4)
Make sure that the RCDU GND TESTS switch is in the NORMAL position.
S 735-011
(5)
Do a test of the body gear and door disagree indication.
(a)
Move the landing gear control lever to the DN position.
(b)
Make sure that the GEAR DISAGREE caution and GEAR DOOR advisory messages do not appear on the upper EICAS display.
NOTE: Page through all EICAS display pages for messages.
____
(c)
Turn the EIU select switch on the P2-4 panel between L, C and R. 1) Make sure the GEAR DISAGREE caution and GEAR DOOR advisory
messages do not appear for the L, C, and R EIUs.
(d)
Move the landing gear control lever to the OFF position.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-00
ALL ú ú 01 Page 504 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(e) Make sure that the GEAR DISAGREE caution message appears on the
upper EICAS display.
NOTE: There is approximately a 25 to 35-second time delay____
after the control lever is moved from DN to OFF or UP
before the GEAR DISAGREE message appears.
(f) Turn the EIU select switch on the P2-4 panel between L,
C and R.
(g) Make sure the GEAR DISAGREE caution message appears for the L,
C, and R EIUs.
(h) Move the landing gear control lever to the UP position while
the gear is locked down.
1) Make sure that the GEAR DISAGREE caution message appears on
the upper EICAS display.
2) Make sure that the GEAR DOOR advisory message appears on
the upper EICAS display when the doors are open.
NOTE: There is approximately a 25 to 35-second time delay____
after the doors are first opened before the GEAR
DOOR message appears.
3) Make sure that the upper EICAS gear display shows a symbol
for each of the five gear and indicates that all five gear
are in the "DOWN" position.
NOTE: If the gear moves while it is pinned down, an in____
transit condition can appear instead of a DN
condition.
4) Make sure that the EICAS GEAR lower display indicates that
all five gear doors are open (five slashed boxes).
5) Turn the EIU select switch on the P2-4 panel between L, C,
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 4(118)
