72-35-00
ALL ú ú C01 Page 810 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
TASK 72-35-00-908-026-C00
4. Connecting Link on the Actuation Ring to the Variable Stator Vanes Removal__________________________________________________________________________ and Installation________________
A. General
(1)
This procedure gives the removal and installation procedures for the eight (four for each side) connecting links.
(2)
Use the links to attach the VSV actuation rings that are split together.
(a) Give the attach points for the bellcrank adjustable links.
(3)
An example procedure is given for the one connecting link and applies to all the links.
B. Consumable Materials
(1)
Grease - graphite (CP2101)
(2)
Adhesive - Loctite 290 (CP2365)
C. References
(1)
AMM 70-10-01/201, Consumable Materials
(2)
AMM 71-11-02/201, Fan Cowl Panels
(3)
AMM 78-31-00/201, Thrust Reverser System
D. Access
(1)
Location Zones
502/602 Left Fan Cowl Panel
503/603 Right Fan Cowl Panel
504/604 Left Thrust Reverser
505/605 Right Thrust Reverser
506 No. 1 Engine
606 No. 2 Engine
(2)
Access Panels
5737L Engine No. 1 - Right Fan Cowl Panel
5738L Engine No. 1 - Left Thrust Reverser
5739L Engine No. 1 - Right Thrust Reverser
5746L Engine No. 1 - Left Fan Cowl Panel
5837R Engine No. 2 - Right Fan Cowl Panel
5838R Engine No. 2 - Left Thrust Reverser
5839R Engine No. 2 - Right Thrust Reverser
5846R Engine No. 2 - Left Fan Cowl Panel
E. Remove the Connecting Link to the VSV Actuation Ring (Fig. 803)
S 868-027-C00
(1)
Make sure the start levers are in the CUTOFF position.
(a) Install the DO-NOT-OPERATE tags.
(2)
Open the right and left fan cowl panel (AMM 71-11-02/201).
S 018-028-C00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-35-00
ALL ú ú C01 Page 811 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 018-029-C00
WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU OPEN THE
_______
THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURY
TO PERSONS OR DAMAGE TO THE EQUIPMENT CAN OCCUR.
(3) Open the right and left thrust reverser (AMM 78-31-00/201).
S 038-030-C00
CAUTION:_______DO NOT TURN, ADJUST OR DISASSEMBLE THE ADJUSTABLE LINK. IF YOU DO MOVE THE ADJUSTABLE LINK, YOU MUST RIG THE ADJUSTABLE LINK AGAIN. IF YOU DO NOT OBEY THIS PRECAUTION, INCORRECT ENGINE OPERATION CAN OCCUR.
(4)
Remove the D-head bolt and nut that attach the bellcrank adjustable
link to the connecting link.
S 028-031-C00
(5)
Remove the bolts that attach the connecting link to the actuation
ring segments, and remove the connecting link.
NOTE: There is a locating pin at each end of the connecting link.
____
S 038-032-C00
(6) Remove the straight pin and the headed pin from the connecting link
and (or) the ring segment.
(a) Keep the pins.
NOTE: In some cases the straight pin can be held in the ring
____ segment, with Loctite 290 adhesive. It is not necessary to remove the pin.
F. Install the Connecting Links to the VSV Actuation Ring (Fig. 803)
S 438-033-C00
(1) Install the straight pin (no head) as follows:
NOTE: If you did not install the pin, you can bond the straight pin
____ to the ring segment with Loctite 290 adhesive. This can prevent the loss of the pin during a future removal. Do not apply the adhesive to the connector side of the pin.
(a)
On the right side of the engine, install the straight pin on the top actuation ring segment.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 ENGINE 發動機 2(69)
