S 434-043-C00

 (11)
 Do these steps to connect the push-pull cables for the thrust control (Fig. 401):

 (a)  ENGINES WITH THE FUEL SHUTOFF CABLE WITHOUT THE ADJUSTABLE CLEVIS END; Do these steps to connect the push-pull cable for the fuel shutoff: 1) Remove the bolts which attach the cover of the
 fuel control box to the fuel control box.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-62-01
 ú  ALL  ú
 ú ú  ú C08.101 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.  Page 422Jul 12/02 

////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
2)  Use two bolts and washers to attach the cable support bracket to the top of the fuel control box. a) Tighten the bolts with your hand.
 NOTE: Do not apply a torque.
____
 3)  Use the bolts, washers and nuts to attach the clamp links for the fuel shutoff cable to the fuel shutoff lever.
 NOTE: Make sure the head of the bolt faces the engine.
____
 a)  Tighten the nut.
 4)  Tighten the bolts which attach the support bracket to the top of the fuel control box. a) Apply a lockwire to the bolts.
 5)  Apply a lockwire to the locknut which attaches the fuel shutoff cable to the support bracket.
 (b)  ENGINES WITH THE FUEL SHUTOFF CABLE WITH THE ADJUSTABLE CLEVIS END; Do these steps to connect the push-pull cable for the fuel shutoff: 1) Use two bolts to attach the cable support bracket to the
 top of the fuel control box.
 a) Tighten the bolts with your hand.

 NOTE: Do not apply a torque.
____
 2)  Use the bolt, washer and nut to attach the clevis end of the fuel shutoff cable to the fuel shutoff lever.
 NOTE: Make sure the head of the bolt faces the engine.
____
 a)  Tighten the nut.
 3)  Tighten the bolts which attach the support bracket to the top of the fuel control box. a) Apply a lockwire to the bolts.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-62-01
 ALL  ú ú C05 Page 423 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(c)  Do these steps to connect the throttle push-pull cable:
 1)  Remove the quick disconnect clamp from the throttle cable.
 2)  Connect the throttle cable to the rack on the fuel control
 box.
 3)  Remove the rig pin from the fuel control box.
 4)  Install the quick disconnect clamps again.
 5)  Tighten the two screws and apply a lockwire to them.
 (d)  Attach the push-pull cables to the clamps on the engine.
 (e)  Use the bolts and washers to attach the cover to the
 fuel control box.
 NOTE:____ You can install the cover after you do the
 travel test for the engine control system.

 S 714-044-C00
 (12) Do this procedure:  Engine Control System Travel Test (AMM 76-11-00/501).
 S 414-048-C00
 WARNING: OBEY THE INSTRUCTIONS IN THE PROCEDURE TO CLOSE THE THRUST
_______ REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS WHEN YOU CLOSE THE THRUST REVERSERS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
 (13)
 Close the left thrust reverser (AMM 78-31-00/201).

 S 414-047-C00

 (14)
 Close the left fan cowl panel (AMM 71-11-02/201).

 S 724-046-C00

 (15)
 Do the leak check procedure for the transfer gearbox as given in the Test Reference Table (AMM 71-00-00/501).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-62-01
 ALL  ú ú C04 Page 424 ú Mar 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 ENGINE 發動機 2(130)