曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (f)  Unbonding of the metallic leading edge is permitted if the
 total length of the unbonded areas is not more than 0.8 in.
 (20,32 mm).
 (g)  OGV's with nicks, dents, or scratches on the composite leading
 edge after some or all of the metallic leading edge is missing.
 (Fig. 602):
 1) There is no maximum quantity of nicks, dents, or scratches
 on the composite leading edge if they are not more than
 0.12 inch (3 mm) in depth.
 2) A maximum service extension of 100 cycles or 250 hours is
 permitted if the nicks, dents or scratches are not more
 than 0.16 inch (4 mm) in depth.
 (h)  Nicks, dents or scratches on the metallic leading edge
 (Fig. 603):
 1) There is no limit on the quantity of nicks, dents, or
 scratches if they are not more than 0.12 inch (3 mm) in
 depth.
 2) A maximum service extension of 100 cycles or 250 hours is
 permitted if the nicks, dents, or scratches are not more
 than 0.16 inch (4 mm) in depth.
 (i)  Nicks, dents or scratches on the trailing edge (Fig. 604):
 1) There is no limit on the quantity of nicks, dents, or
 scratches if they are not more than 0.12 inch (3 mm) in
 depth.
 2) A maximum service extension of 100 cycles or 250 hours is
 permitted if the nicks, dents, or scratches are not more
 than 0.2 inch (5 mm) in depth.
 (j)  Nicks, dents or scratches on the airfoil surfaces:
 1) There is no limit on the quantity of nicks, dents, or
 scratches if they are not more than 0.02 inch (0.5 mm) in
 depth.
 2) A maximum service extension of 100 cycles or 250 hours is
 permitted if the nicks, dents, or scratches are not more
 than 0.06 inch (1.5 mm) in depth.
 (k)  Loose bonds on the inner or outer platforms:
 1) Loose bonding on the inner or outer platforms is not
 serviceable.
 2) A maximum service extension of 10 cycles or 25 hours is
 permitted with loose bonding on the inner or outer
 platforms.
 (l)  Nicks, dents or scratches on the inner and outer platforms:
 1) There is no limit on the quantity of nicks, dents, or
 scratches if they are not more than 0.04 inch (1 mm) in
 depth.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-33-00
 ALL  ú ú C02 Page 622 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
OUTLET GUIDE VANES (OGV) INSPECTION
___________________________________
 2)  A maximum service extension of 100 cycles or 250 hours is permitted if the nicks, dents, or scratches are not more than 0.12 inch (3 mm) in depth.
 (m)  
Cracks on the inner and outer platforms are not serviceable.

 (n)  
Cracks between the attachment hole and the airfoil on the outer platform: 1) Any number of little cracks is permitted on the outer

 platform in the area between the attachment hole and the airfoil. The longest crack permitted is one that starts in the attachment hole and continues up to the airfoil.
 S 846-030-C00
 (4)  Do the procedure to put the airplane back to its usual condition.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-33-00
 ALL  ú ú C02 Page 623 ú Nov 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
OGV INNER SHROUD INSPECTION
___________________________
 TASK 72-33-00-216-031-C00
 9. OGV Inner Shroud Inspection
___________________________
 A. Access
 (1)  Location Zones
 506 No. 1 Engine
 606 No. 2 Engine

 B. Make an Inspection of the OGV's Inner Shroud (Fig. 601)
 S 846-032-C00
 (1)  
If not already done, do the procedure to prepare for the inspection.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 ENGINE 發動機 2(26)