(b)  
Between the forward acoustical panels.

 S 844-009-C00
 CAUTION: DO NOT LEAVE TOOLS OR UNWANTED OBJECTS IN THE ENGINE INLET.
_______ THESE OBJECTS CAN GO IN THE ENGINE AND CAUSE DAMAGE.
 (4)  
Remove the protective mats from the engine inlet.

 (5)  
Remove the DO-NOT-OPERATE tags from the start levers.

 S 864-010-C00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-33-02
 ALL  ú ú C02 Page 405 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
TASK 72-33-02-004-011-C00
 4. Mid Acoustical Panel Removal
____________________________
 A. Equipment
 (1)  Protective Mats (two required) - Rubber
 Manufacturer's Association, Grade SC43,
 neoprene sponge, 1 inch thick, approximately 3
 x 4 feet with warning streamers attached.

 B. References
 (1)  AMM 72-31-02/401, Fan Rotor Blades
 C. Access
 (1)  Location Zones
 501/601 Inlet and Cowl
 506/606 Engine

 D. Remove the Mid Acoustical Panel
 S 864-031-C00
 (1)  Make sure the start levers are in the CUTOFF position.
 (a)  Install the DO-NOT-OPERATE tags.
 S 844-032-C00
 CAUTION: MAKE SURE THE EDGES OF THE MATS ARE TIED TOGETHER OR TAPED, TO
_______ PREVENT DAMAGE TO THE INLET COWL. TOOLS, PARTS, OR UNWANTED MATERIALS CAN FALL ON THE INLET COWL AND CAN CAUSE DAMAGE.
 (2)  Install the protective mats in the inlet.
 (a)  Make sure you give protection to the bottom half of the inlet cowl.
 S 014-012-C00
 (3)  
Remove the three fan blades that are adjacent to the panel (AMM 72-31-02/401).

 (4)  
Remove the mid acoustical panel as follows (Fig. 402):

 S 024-013-C00
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-33-02
 ALL  ú ú C01 Page 406 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEEA
FILLET SKIN 
SEE  B 
PANEL MID ACOUSTICAL  A MID ACOUSTICAL PANELS 
(8 PLACES) BOLT  B 
Figure 402 Fan Mid Acoustical Panel Installation 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-33-02
 ALL  ú ú C02 Page 407 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(a)  Turn the fan to align the empty space of fan blades with the acoustical panel to be removed.
 CAUTION: IF YOU USE A PNEUMATIC OR ELECTRICAL SCREWDRIVER TO LOOSEN
_______ AND REMOVE THE ACOUSTICAL PANEL SCREWS, MAKE SURE THE SPEED IS NOT MORE THAN 200 RPM. IF THE SPEED IS MORE THAN 200 RPM, DAMAGE TO THE EQUIPMENT CAN OCCUR.
 (b)  
Remove the eight screws that attach the panel to the fan case.

 (c)  
If you find a screw which has no torque feel when it is removed, discard and replace it with a new screw.

 (d)  
Lift out the larger end of the panel from the fan case while you slide the narrower end out from under the adjacent panel.

 (e)  
Remove the panel from the engine.

 S 034-014-C00
 (5)  If it is necessary, remove the snap-fit fillet skin from the panel and keep it for the installation.
 TASK 72-33-02-404-015-C00
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 ENGINE 發動機 2(48)