S 022-026-C00
(4)
Remove the QAD clamp from the adapter.
S 032-027-C00
(5)
Do these steps to remove the adapter from the AGB housing:
(a)
Remove the screws that attach the adapter to the AGB housing.
(b)
Remove the O-ring from the adapter.
(c)
Discard the O-ring.
TASK 72-60-00-402-026-C00
7. Fuel Pump QAD Ring Installation
_______________________________
A. Consumable Materials
(1) Grease - Graphite
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-60-00
ALL ú ú C05 Page 217 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEE B
SEE A
FUEL PUMP
DRIVE PAD
A ASSEMBLY
ALIGNMENT
PIN
BALL SEAT WASHER SUPPORT
STRAIGHT
PIN
BOLT 1
RETAINING
PACKING
PIN SPRING O-RING
1
ADAPTOR
SELF-ALIGNING SCREW
NUT
1
OUTER RING FUEL PUMP QAD RING
1 PART OF QAD 1 B GMM-1123532-00-B
CLAMP ASSEMBLY
Fuel Pump QAD Ring Installation
Figure 204
E37292
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
72-60-00
ALL ú ú C01 Page 218 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
(2) Oil - Engine
B. References
(1)
AMM 71-11-02/201, Fan Cowl Panels
(2)
AMM 73-11-01/401, Fuel Pump Package
C. Access
(1)
Location Zones
502 Engine No. 1 - Accessory Gearbox
602 Engine No. 2 - Accessory Gearbox
(2)
Access Panels
5746L Engine No. 1 - Left Fan Cowl Panel
5846R Engine No. 2 - Left Fan Cowl Panel
D. Procedure
S 432-029-C00
(1) Do these steps to install the adapter on the AGB housing (Fig. 204):
(a)
Apply a light layer of engine oil on the new O-ring.
(b)
Install the new O-ring on the adapter.
(c)
Install the adapter on the AGB housing, use the alignment pins on the housing as locators.
(d)
Apply a light layer of graphite grease (CP 2101) on the threads of the screws.
(e)
Attach the adapter to the AGB housing with the screws.
1) Tighten the screws to 252-279 pound-inches (28.5-31.5 Newton meters).
S 422-030-C00
(2) Install the QAD clamp on the adapter.
(a) Align the clamp and the adapter with the alignment marks.
S 432-031-C00
(3) Do these steps to install the support on the AGB housing:
(a)
Apply a light layer of graphite grease on the threads of the bolts.
(b)
Attach the support on the AGB housing with the bolts.
1) Tighten the bolts to 252-279 pound-inches (28.5-31.5 Newton meters).
(c)
Install the lockwire.
S 432-032-C00
(4) Do these steps to attach the QAD clamp to the adapter.
(a) Put the ball seat washer on the bolt.
NOTE: The concave side of the washer must point outward.
____
(b)
Install the bolt in the support.
(c)
Put the retainer packing on the bolt.
(d)
Apply a light layer of graphite grease on the threads of the bolt.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 ENGINE 發動機 2(119)
