H18596
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-86
ALL ú ú 02 Page 403 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 024-023
(5)
Remove the panel 8215L or 8715R to get access to the exhaust gate actuation mechanism (AMM 12-31-61/201) (Fig. 401).
D.
Procedure
S 024-024
(1)
Remove the Flap Deflection Control Plunger (Fig. 401):
(a)
Remove the nut and washers from the outboard end of the plunger.
(b)
Remove the plunger and spring from the bore of the outboard midflap rib assembly.
TASK 27-51-86-404-007
2. Flap Deflection Control Plunger Installation____________________________________________
A. References
(1)
AMM 12-31-01/201, Zone Diagrams
(2)
AMM 12-31-61/201, Wing Lower Surface Access Doors and Panels
(3)
AMM 27-51-00/201, Trailing Edge Flap Systems
(4)
AMM 27-51-86/501, Flap Deflection Control Plunger Adjustment
MIDFLAP LOCKING
FWD
A-A
Flap Deflection Control Plunger Installation
Figure 401 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-86
ALL ú ú 02 Page 404 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
H18602
B.
C.
D.
A
737-300/400/500MAINTENANCE MANUAL
(5)
AMM 29-15-00/201, Hydraulic Systems A, B, and StandbyAccess
(1)
Location Zone 307 Left Wing Trailing Edge Outboard Flap and Spoilers 407 Right Wing Trailing Edge Outboard Flap and Spoilers
(2)
Access Panels 8215L Exhaust-Gate Linkage Access Panel 8715R Exhaust-Gate Linkage Access Panel
Procedure
S 424-012
(1)
Install the flap deflection control plunger on the outboard midflap rib assembly (Fig. 401):
(a)
Put the spring on the shaft of the plunger.
(b)
Install the plunger and the spring into the bore of the outboard midflap rib assembly.
(c)
Install the washers and nut onto the outboard end of the plunger.
S 824-025
(2) Do this task: "Flap Deflection Control Plunger Adjustment"
(AMM 27-51-86/501).Put the Airplane Back to Its Usual Condition
S 444-026
(1) Do this task: "Trailing Edge Flap System Activation" (AMM 27-51-00/201).
S 864-027
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
_______ SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS, ELEVATORS, FLAPS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(2) Do this task to pressurize hydraulic system B: "Pressurize Hydraulic System A, B, or Standby" (AMM 29-15-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-86
ALL ú ú 02 Page 405 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 4(151)
