(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | G | 0.3139 | 0.3144 | | | 0.3094 | | | | OD 11 | (7.973) | (7.985) | | | (7.858) | | | | | | | 0.0006 | 0.0089 | | | 0.0179| | | | | (0.015) | (0.226) | | |(0.454) | | G | 0.3150 | 0.3228 | | | | 0.3273 | | | ID 13 | (8.000) | (8.199) | | | | (8.313) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-061
M. Inspection of the Aft Fixed Fairing
(Ref. Fig. 604/TASK 54-54-00-991-006)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | H | 0.4365 | 0.4370 | | | 0.4350 | | | | OD 16 |(11.087) |(11.099) | | |(11.048) | | | | | | | 0.0020 | 0.0032 | | | 0.0063| | | | | (0.050) | (0.081) | | |(0.160) | | H | 0.4390 | 0.4397 | | | | 0.4413 | | | ID 15 |(11.150) |(11.168) | | | |(11.209) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-062
N. Inspection of the Aft Fixed Fairing
(Ref. Fig. 604/TASK 54-54-00-991-006)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | H | 0.3740 | 0.3745 | | | 0.3733 | | | | OD 17 | (9.499) | (9.512) | | | (9.481) | | | | | | | 0.0003 | 0.0014 | | | 0.0028| | | | | (0.007) | (0.035) | | |(0.071) | | H | 0.3748 | 0.3754 | | | | 0.3761 | | | ID 18 | (9.519) | (9.535) | | | | (9.552) | | -------------------------------------------------------------------------------
5. Close-up
________ Subtask 54-54-00-420-051
A. Installation of Component
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the aft fixed fairing (Ref. TASK 54-54-00-400-001). Subtask 54-54-00-440-050
B. Aircraft Maintenance Configuration
(1)
Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 54-54-00-942-052
C. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
SEAL - AFT FIXED FAIRING - REPAIRS
__________________________________
TASK 54-54-41-300-001
Replacement of the Aft Fixed Fairing Seal.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NACELLES/PYLONS(97)
