R 4. Procedure
_________
R Subtask 54-55-41-020-050
R A. Removal of the Aft Movable-Fairing Seals
R (Ref. Fig. 401/TASK 54-55-41-991-001)
R (1) Remove and discard the seals (1), (5) and (8) from the retainers.
Aft Movable-Fairing Seals
Figure 401/TASK 54-55-41-991-001
1EFF : ALL 1 54-55-41 Page 404
1 1 Feb 01/02
1 1
1CES 1
TASK 54-55-41-400-001
Installation of the Aft Movable-Fairing Seals
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
No specific emery cloth
No specific emery cloth, grade 120 to 240
No specific washing powder
Material No. 08-004 USA MIL-A-25457
ADHESIVE SEALANT (Ref. 20-31-00)
Material No. 08-018 USA MMM-A-121
SOLVENT-BASED SYNTHETIC RUBBER ADHESIVE
(Ref. 20-31-00)
Material No. 11-003 USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
R 1 clip 54-55-11 02D-335
R 1 clip 54-55-11 02D-338 1 clip 54-55-11 02F-335 1 clip 54-55-11 02F-338
R 2 seal 54-55-11 02D-370 2 seal 54-55-11 02E-370 2 seal 54-55-11 02F-370 2 seal 54-55-11 02F-370A
R 3 clip 54-55-11 02D-365
R 3 clip 54-55-11 02D-368 3 clip 54-55-11 02F-365 3 clip 54-55-11 02F-368
1EFF : ALL 1 54-55-41Page 405 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R R R R R R R R R R 4 4 4 4 4 4 4 5 5 5 5 5 6 6 6 6 7 7 7 7 8 8 8 8 9 9 9 9 clip clip clip clip clip clip clip seal seal seal seal seal clip clip clip clip clip clip clip clip seal seal seal seal clip clip clip clip 54-55-11 02D-060 54-55-11 02D-36554-55-11 02E-06054-55-11 02E-060A54-55-11 02F-06054-55-11 02F-060A54-55-11 02F-365 54-55-11 02D-06054-55-11 02E-06054-55-11 02E-060A54-55-11 02F-06054-55-11 02F-060A 54-55-11 02D-365 54-55-11 02D-36854-55-11 02F-36554-55-11 02F-368 54-55-11 02D-335 54-55-11 02D-33854-55-11 02F-33554-55-11 02F-338 54-55-11 02D-34054-55-11 02E-34054-55-11 02F-34054-55-11 02F-340A 54-55-11 02D-365 54-55-11 02D-36854-55-11 02F-36554-55-11 02F-368
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-50-00-866-008 78-30-00-081-041 78-30-00-481-041 SRM 514000 PB 001 54-55-41-991-001 54-55-41-991-002 Extension of the Flaps on the GroundMake the Thrust Reverser Serviceable after MaintenanceMake the Thrust Reverser Unserviceable for Maintenance(for corrective action)Fig. 401Fig. 402
R 3. Job Set-up
__________
R Subtask 54-55-41-860-050
R A. Aircraft Maintenance Configuration
R (1) Make sure that the access platform is in position.
R (2) Make sure that the warning notices are in position.
R (3) Make sure that the thrust reverser is unserviceable (Ref. TASK 78-30-
R 00-481-041).
R (4) Make sure that the flap/slat control lever is in the FULL position
R (Ref. TASK 27-50-00-866-008).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NACELLES/PYLONS(105)
