4. Procedure_________
 (Ref. Fig. 601/TASK 54-55-00-991-002, 602/TASK 54-55-00-991-003)
 Subtask 54-55-00-220-050
 A. Inspection of the Aft Movable Fairing (Ref. Fig. 601/TASK 54-55-00-991-002)
 (1) Measure these dimensions of the aft movable fairing and make sure that they are correct.
 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 0.2666 | 0.2672 | | | 0.2654 | | | | OD 1 | (6.771) | (6.786) | | | (6.741) | | | | | | | 0.0005 | 0.0025 | | | 0.0050| | | | | (0.012) | (0.063) | | |(0.126) | | B | 0.2677 | 0.2691 | | | | 0.2704 | | | ID 2 | (6.799) | (6.835) | | | | (6.868) | | -------------------------------------------------------------------------------
R  Subtask 54-55-00-220-059 
R R  B. Inspection of the Aft Movable Fairing (Ref. Fig. 601/TASK 54-55-00-991-002) 
R R  (1) Measure these dimensions of the aft movable fairing and make sure that they are correct.

 Forward Attach Fitting of the Aft Movable Fairing
 Figure 601/TASK 54-55-00-991-002
 1EFF :  ALL  1  54-55-00 Page 604 
1  1  Feb 01/98
 1  1
 1CES  1

 Aft Attach Fitting of the Aft Movable Fairing
 Figure 602/TASK 54-55-00-991-003
 1EFF :  ALL  1  54-55-00 Page 605 
1  1  Feb 01/98
 1  1
 1CES  1

R R R R R R R R R R R R R R R  -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 0.2666 | 0.2672 | | | 0.2654 | | | | OD 13 | (6.771) | (6.786) | | | (6.741) | | | | | | | 0.0005 | 0.0025 | | | 0.0050| | | | | (0.012) | (0.063) | | |(0.126) | | B | 0.2677 | 0.2691 | | | | 0.2704 | | | ID 14 | (6.799) | (6.835) | | | | (6.868) | | -------------------------------------------------------------------------------
Subtask 54-55-00-220-052 
R  C. Inspection of the Aft Movable Fairing (Ref. Fig. 601/TASK 54-55-00-991-002)
 (1) Measure these dimensions of the aft movable fairing and make sure that they are correct.
 -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 0.4364 | 0.4369 | | | 0.4348 | | | | OD 2 |(11.084) |(11.097) | | |(11.043) | | | | | | | 0.0021 | 0.0033 | | | 0.0065| | | | | (0.053) | (0.083) | | |(0.165) | | D | 0.4390 | 0.4397 | | | | 0.4413 | | | ID 3 |(11.150) |(11.168) | | | |(11.209) | | -------------------------------------------------------------------------------
Subtask 54-55-00-220-053 
R  D. Inspection of the Aft Movable Fairing (Ref. Fig. 601/TASK 54-55-00-991-002)
 (1) Measure these dimensions of the aft movable fairing and make sure that they are correct.

 -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 0.4364 | 0.4369 | | | 0.4343 | | | | OD 2 |(11.084) |(11.097) | | |(11.031) | | | | | | | 0.0021 | 0.0043 | | | 0.0085| | | | | (0.053) | (0.109) | | |(0.215) | | C,D | 0.4390 | 0.4407 | | | | 0.4428 | | | ID 4 |(11.150) |(11.193) | | | |(11.247) | | -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM NACELLES/PYLONS(102)