曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R  No specific  access platform 1.50 m (4 ft. 11 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 Material No. 19-003  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R R  52-41-00-010-002 52-41-00-410-002 53-12-13-000-001 53-12-13-400-001 SRM 511100,P.Block 001 SRM 512200,P.Block 001 53-11-00-991-093 53-11-00-991-022  Open the Avionics Compartment Doors for Access Close the Avionics Compartment Doors after AccessRemoval of the avionics compartment floor panelsInstallation of the avionics compartment floor panels (for corrective action) (for corrective action) Fig. 629 Fig. 630

 CES  CES

 3. Job Set-up__________
 Subtask 53-11-00-010-062
 A. Get Access 
R  (1) Put an access platform in position at zone 824.
 (2) Open the lateral avionics-compartment door 824 (Ref. TASK 52-41-00-010-002). 
R  Subtask 53-11-00-020-060-A 
R R  B. Removal of the Components (Ref. Fig. 629/TASK 53-11-00-991-093) 
R R  (1) Remove the two quick-release pins (1) and lift and remove the ladder (2), if necessary. 
R R  (2) Remove the floor panel 127BG (4) of the avionics compartment (Ref. TASK 53-12-13-000-001).
 Subtask 53-11-00-110-076
 C. Cleaning of the Structure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.

 

R R  Ladder Figure 629/TASK 53-11-00-991-093
 EFF :  ALL  53-11-00 Page A609 Aug 01/03
 CES 

 4. Procedure
_________

 Subtask 53-11-00-220-085
 A. Inspection (Ref. Fig. 630/TASK 53-11-00-991-022)
 (1) Do a detailed inspection of: - The continuity fitting (1) between FR20 and FR21, - The angle fitting (2) on the two sides of FR21, at STGR41, left and right sides.
 (2) Make sure that there is no: 
R  (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200,P.Block 001) for types of corrosion, inspection, removal and corrosion protection. 
R R  (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100,P.Block 001) for damage classification and corrective action.
 5. Close-up________ 
R  Subtask 53-11-00-420-058-A 
R R  A. Installation of the Components (Ref. Fig. 629/TASK 53-11-00-991-093) 
R R  (1) Install the floor panel 127BG (4) in the avionics compartment (Ref. TASK 53-12-13-400-001). 
R R  (2) Install the ladder (2) on the floor fittings (3), if necessary, and install the two quick-release pins (1).
 Subtask 53-11-00-410-062
 B. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Close the lateral avionics-compartment door 824 (Ref. TASK 52-41-00-410-002).

 EFF : ALL 53-11-00Page A610 Feb 01/04
 CES R Continuity Fitting between FR20 and FR21 and Angle Fittings at FR21 R Figure 630/TASK 53-11-00-991-022

 EFF : ALL 53-11-00Page A611 Aug 01/03
 CES

 (3) Remove the access platform(s).

 EFF : ALL 53-11-00Page A612

Aug 01/03
R
 CES  CES  CES

 TASK 53-11-00-210-803 
R  General Visual Inspection of NLG Bay, all Panels, LH/RH
 1. Reason for the Job__________________
 Refer to the MPD TASK: 531161-01
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(59)