__________ Subtask 53-21-00-941-054
A. Get Access WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE ELEVATORS ARE CLEAR
_______
DURING CARGO COMPARTMENT DOOR OPERATION.
(1)
Put an access platform in position at the zone 825.
(2)
Open the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-001).
Subtask 53-21-00-020-050
B. Removal of the Components
(1) Remove the eccentric bolts (Ref. TASK 52-31-32-000-001). Subtask 53-21-00-110-071
C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure
_________ Subtask 53-21-00-220-062
A. Inspection
(Ref. Fig. 609/TASK 53-21-00-991-005)
(1) Do a detailed inspection of the eccentric bolts at the lock fittings on the locking mechanism from FR25 to FR27A.
EFF : ALL
53-21-00Page 650
May 01/05
R
CES
Eccentric Bolts on the Locking Mechanism Fittings of the Forward Cargo
Compartment Door
Figure 609/TASK 53-21-00-991-005
EFF : ALL
53-21-00Page 651
May 01/05 R CES
(2) Make sure that there is no :
(a)
Corrosion damage :
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...).
-If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up
________ Subtask 53-21-00-420-050
A. Installation of the components
(1) Install the eccentric bolts (Ref. TASK 52-31-32-400-001). Subtask 53-21-00-942-056
B. Close Access WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE ELEVATORS ARE CLEAR
_______
DURING CARGO COMPARTMENT DOOR OPERATION.
(1)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
EFF : ALL
53-21-00Page 652
May 01/05
R
CES TASK 53-21-00-200-006
Detailed Inspection of Circumferential Joint at FR 24, between Stringer 6 LH and Stringer 6 RH, Internal Side
1. Reason for the Job
__________________
Refer to the MPD TASK: 532185-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4.00 m (13 ft. 1 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(144)
