(1)
Do a detailed inspection of:
-
the fuselage skin
-
the part of the window forging doublers that you can see around the cabin windows.
-this inspection is applicable to the external surface from FR28 to FR35, between STGR14 and STGR18, left and right sides.
(2)
Make sure that there is no :
(a)
Corrosion damage :
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...):
Cabin Window Frame, External Surface Figure 614/TASK 53-21-00-991-008
R EFF : ALL 53-21-00 Page 672 May 01/05
CES
-If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up
________
Subtask 53-21-00-942-061
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
TASK 53-21-00-200-023
Detailed Inspection of Fuselage Skin at FR 35 and 10cm Forward, at Level of Stringer 30, Internal Side, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 532166-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 1.5 m (4 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R EFF : 001-049, 051-099, 101-149, 151-199, 53-21-00Page 674 201-299, 401-499, Aug 01/05
CES
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-54-12-000-001 Removal of the FWD Cargo Compartment Partition FR34 25-54-12-400-001 Installation of the FWD Cargo Compartment Partition
FR34 25-80-00-000-001 Removal of the Insulation Blankets 25-80-00-400-001 Installation of the Insulation Blankets 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) 53-21-00-991-025 Fig. 615
3. Job Set-up
__________
Subtask 53-21-00-010-066
A. Get Access
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE ELEVATORS ARE CLEAR
_______
DURING CARGO COMPARTMENT DOOR OPERATION.
(1)
Put an access platform in position at the zone 131 (132).
(2)
Open the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-001).
(3)
Remove the lining at the zone 137 (138): 131PW, 132PW (Ref. TASK 25-54-12-000-001).
(4)
Remove the insulation blankets as necessary to see the structure (Ref. TASK 25-80-00-000-001).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(149)
