3. Job Set-up__________
Subtask 53-11-00-010-054
A. Get Access
R (1) Put an access platform in position at the zone 824.
R R (2) Open the lateral avionics-compartment door 824 (Ref. TASK 52-41-00-010-002).
Subtask 53-11-00-110-065
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-076
R A. Inspection (Ref. Fig. 614/TASK 53-11-00-991-025)
R R (1) Do a detailed inspection of the structure of the splices of FR20 at the lower stringers STGR30 and STGR32, left and right sides.
(2) Make sure that there is no:
R R (a) corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
R R Splices of the FR20 at the STGR30 and STGR32 Figure 614/TASK 53-11-00-991-025
R EFF : ALL 53-11-00 Page 657 May 01/03
CES
R R R (b) other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-410-054
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Close the lateral avionics-compartment door 824 (Ref. TASK 52-41-00-410-002).
(3) Remove the access platform(s).
R **ON A/C 001-049, 051-099, 101-149, 201-299,
TASK 53-11-00-220-004
Special Detailed Inspection of Sliding Window Frame at FR4 Lower Forward Corners, Internal Side, LH/RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 531130-01
2. Job Set-up Information
______________________
A. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door NTM 531173,P.Block-601 SRM 511100,P.Block 001 (for corrective action) SRM 512200,P.Block 001 (for corrective action) 53-11-00-991-074 Fig. 615
3. Job Set-up
__________
Subtask 53-11-00-010-086
A. Get Access
(1) Open the FWD passenger/crew door 831 (841), (Ref. TASK 52-10-00-010-001).
Subtask 53-11-00-110-100
B. Preparation of the Inspection Area (Ref. Fig. 615/TASK 53-11-00-991-074)
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
(1)
Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and MISCELLANEOUS (Material No. 19-003), if necessary.
(2)
Make sure that the surface of the inspection area is clean and
smooth.
(3)
Do a check of the inspection area for visible damage or
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(48)
