(1) Do a detailed inspection of the external surface of the cutout panels of the forward cargo-compartment door (825). This inspection is applicable to the upper corners.
EFF : ALL
53-21-00Page 645
May 01/05
R
CES
Forward Cargo-Compartment Door - Cutout Panels - Upper and Lower Corners Figure 608/TASK 53-21-00-991-004
EFF : ALL
53-21-00Page 646
May 01/05 R CES
(2) Make sure that there is no :
(a)
Corrosion damage :
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...):
-If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
Subtask 53-21-00-010-064
B. Get Access
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE ELEVATORS ARE CLEAR
_______
DURING CARGO COMPARTMENT DOOR OPERATION.
(1) Open the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-001).
Subtask 53-21-00-110-058
C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
EFF : ALL
53-21-00Page 647
May 01/05
R
CES
Subtask 53-21-00-220-061
D. Inspection
(Ref. Fig. 608/TASK 53-21-00-991-004)
(1)
Do a detailed inspection of the external surface of the cutout panels of the forward cargo-compartment door (825). This inspection is applicable to the lower corners.
(2)
Make sure that there is no :
(a)
Corrosion damage :
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...):
-If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up
________
Subtask 53-21-00-410-063
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
(3)
Remove the access platform(s).
EFF : ALL
53-21-00Page 648
May 01/05
R
CES TASK 53-21-00-200-005
Detailed Inspection of Forward Cargo Door Eccentric Bolts of Locking Mechanism at Lock Fittings, between FR 25 and FR 27A
1. Reason for the Job
__________________
Refer to the MPD TASK: 532196-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(143)
