R Lining Panels of the Windshield Side Post at FR4 Figure 620/TASK 53-11-00-991-041
EFF : ALL 53-11-00 Page 679 May 01/03
CES
R Bolts at the Upper Attachment of the Windshield Side Post, at FR4 R Figure 621/TASK 53-11-00-991-042-A
EFF : ALL
53-11-00Page 680
Feb 01/05 CES
Subtask 53-11-00-110-071
C. Preparation of the Inspection Area (Ref. Fig. 622/TASK 53-11-00-991-069-A)
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
(2) Make sure that the surface of the inspection area is clean and smooth.
R R (3) Do a visual check of the inspection area for damage or discontinuities.
(4) Make sure that there is no:
R R (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200,P.Block 001) for types, inspection, removal and corrosion protection.
R R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps...): - If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100,P.Block 001) for damage classification and corrective action.
EFF : ALL
53-11-00Page 681
Aug 01/03
R Windshield Side Post at FR4 - Upper Attachment Figure 622/TASK 53-11-00-991-069-A
EFF : ALL 53-11-00 Page 682 Aug 01/03
CES
4. Procedure_________
R Subtask 53-11-00-250-055-A
R R A. Inspection (Ref. Fig. 622/TASK 53-11-00-991-069-A)
R R R R (1) Do a special detailed inspection of the internal side of the upper attachment (3 positions) of the windshield side post at FR4 (left and right sides). (Ref. NTM 531135,P.Block-601).
R (2) Make a report of the damage after the NDT inspection:
R R R R (a) Corrosion damage: - If you find damage, refer to the Structural Repair Manual (Ref. SRM 512200,P.Block 001) for types, inspection, removal and corrosion protection.
R R R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps...): - If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100,P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-914-050
A. Preparation of the Bolts for Installation
(1) Make sure that the parts retained from the removed component are clean and in the correct condition.
(2) Apply a bead of SEALANTS (Material No. 09-005) around the bolts (1) and the nuts (2).
Subtask 53-11-00-420-060
R B. Installation of the Components (Ref. Fig. 621/TASK 53-11-00-991-042-A)
(1) Install the 3 bolts (1) and the nuts (2).
EFF : ALL
53-11-00Page 683
Feb 01/05
Subtask 53-11-00-410-066
C. Close Access
(1) Install the lining panels 211BC, 211KC, 211LC (212BC, 212KC, 212LC).
R (2) Install the lining panels 211NW (212NW).
R (3) Close the sliding window (Ref. TASK 56-12-11-410-001).
(4) Make sure that the work area is clean and clear of tool(s) and other items.
R (5) Close the forward passenger/crew door 831 (841) (Ref. TASK 52-10-00-410-001).
(6) Remove the access platform.
EFF : ALL
53-11-00Page 684
TASK 53-11-00-210-015
R Detailed Inspection of Side Window Structure, Upper Junction, between Forward R and Rear FR, External Surface, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 531141-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4.00 m (13 ft. 1 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(53)
