3. Job Set-up
__________
Subtask 53-11-00-941-055
A. Get Access
(1) Put an access platform in position at the zone 120.
Subtask 53-11-00-110-059
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure
_________
Subtask 53-11-00-220-072
A. Inspection
(Ref. Fig. 610/TASK 53-11-00-991-007)
(1)
Do a detailed inspection of the structure of the lap joint from FR9 to FR20, L and R sides.
(2)
Make sure that there is no:
(a)
corrosion damage:
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
(b)
other damage (cracks, scratches, stress, marks, dents, bumps,...):
R Lap Joint from FR9 to FR20 Figure 610/TASK 53-11-00-991-007
EFF : ALL 53-11-00 Page 641 May 01/03
CES
-If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up
________
Subtask 53-11-00-942-055
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
R TASK 53-11-00-210-008 Detailed Inspection of Upper Skin of Upper Longitudinal Lap Joint, between FR
15 and FR 16 and FR 20 and FR 24, External Surface, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 531120-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4.80 m (15 ft. 9 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action)
SRM 512200 P.Block 001 (for corrective action)
53-11-00-991-008 Fig. 611
EFF : ALL
53-11-00Page 643
3. Job Set-up__________
Subtask 53-11-00-941-056
A. Get Access
R (1) Put an access platform in position at the zone 223 (224).
Subtask 53-11-00-110-060
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(45)
