__________________________________________________
 TASK 52-35-12-000-001
 Removal of the Indicator Light 9MJ
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 98F52308330000 1 SPANNER - WRENCH

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 001-003,
 52-35-12-991-001 Fig. 401 R **ON A/C 004-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 52-35-12-991-001-A Fig. 401A
 1EFF : ALL 1 52-35-12Page 401 1 1 Aug 01/05 1 1 1CES 1R **ON A/C ALL

 3. Job Set-up
__________
 Subtask 52-35-12-865-050

 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU DOORS/CARGO 1MJ T12
 Subtask 52-35-12-010-050
 B. Get Access
 (1) Open the access panel 134AR to get access to the indicator light 9MJ.
 4. Procedure
_________ R **ON A/C 001-003,
 Subtask 52-35-12-020-050
R A. Removal of the Indicator Light 9MJ (Ref. Fig. 401/TASK 52-35-12-991-001)
 (1)
 Remove the lamp (3) from the lamp body (4) as follows:

 (a)
 Turn the lamp cover (1) and remove it together with the rubber cap (2) from the lamp body (4).

 (b)
 Remove and discard the lamp (3) from the lamp body (4).

 (2)
 Remove the lamp body (4) from the mounting bracket (6) as follows:

 (a)
 Remove the castle nut (5) from the lamp body (4) with the SPANNER

 -WRENCH (98F52308330000)

 (b)
 Remove the lamp body (4) together with the tab washer (7) and the castle nut (8) from the mounting bracket (6).

 1EFF : ALL 1 52-35-12Page 402 1 1 Aug 01/01 1 1 1CES 1

 Indicator Light 9MJ
 Figure 401/TASK 52-35-12-991-001 
R 1EFF :  001-003,  1  52-35-12 Page 403 
1  1  Aug 01/01
 1  1
 1CES  1

 (c)
 Remove and discard the heat-shrink tubing (9) from the wire harness (10) to get access to the soldering terminals of the lamp body (4).

 (d)
 Make a mark on the wire harness (10) to identify the indivitual wire.

 (e)
 Disconnect the wire harness (10) from the terminals of the lamp body (4).

R **ON A/C 004-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 52-35-12-020-050-A
 A. Removal of the Indicator Light 9MJ
 (Ref. Fig. 401A/TASK 52-35-12-991-001-A)

 (1)
 Remove the lamp (3) from the lamp body (4) as follows:

 (a)
 Turn the lamp cover (1) and remove it together with the rubber cap (2) from the lamp body (4).

 (b)
 Remove and discard the lamp (3) from the lamp body (4).

 (2)
 Remove the lamp body (4) from the mounting bracket (6) as follows:

 (a)
 Remove the castle nut (5) from the lamp body (4) with the SPANNER

 -WRENCH (98F52308330000)

 (b)
 Remove the lamp body (4) together with the tab washer (7) and the castle nut (8) from the mounting bracket (6).

 (c)
 Make a mark on the wire harness (10) to identify the indivitual wire.

 (d)
 Disconnect the wire harness (10) from the terminals of the lamp body (4).

 1EFF : ALL 1 52-35-12Page 404 1 1 Aug 01/05 1 1 1CES 1

 Indicator Light 9MJ Figure 401A/TASK 52-35-12-991-001-A
R 1EFF : 004-049, 051-099, 101-149, 151-199, 1 52-35-12Page 405 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-35-12Page 406 1 1 May 01/05 1 1 1CES 1

 **ON A/C ALL
 TASK 52-35-12-400-001
 Installation of the Indicator Light 9MJ
 1. Reason for the Job__________________
 Self Explanatory
 2. Job Set-up Information______________________
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門6(89)