-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-41-00-010-002 52-41-00-410-002 SRM 511100 P.Block 001 SRM 512200 P.Block 001 52-41-14-991-002
3. Job Set-up
__________
Subtask 52-41-14-010-052
A. Get Access Open the Avionics Compartment Doors for AccessClose the Avionics Compartment Doors after Access(for corrective action)(for corrective action)Fig. 601
R (1) Put an access platform in position at the zone 824.
R (2) Open the aft avionics compartment door 824 (Ref. TASK 52-41-00-010-002).
Subtask 52-41-14-865-053
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SDAC1 AND 2/DOOR/DET/AVNCS 46WV P02
Subtask 52-41-14-110-050
R C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
1EFF : ALL 1 52-41-14Page 602 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-41-14Page 603 1 1 May 01/03 1 1 1CES 1
R R R (1) Clean the inspection surface with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 52-41-14-220-052
R A. Inspection (Ref. Fig. 601/TASK 52-41-14-991-002)
R R (1) Do a detailed inspection of the internal structure of the aft avionics compartment access door 824.
(2) Make sure that there is no:
R R (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
R R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
Subtask 52-41-14-916-051
R B. Application of the Temporary Protection
CAUTION : DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS._______ MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET: -ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS. -ON LUBRICATED SURFACES. -IN DRAIN VALVES OR OTHER ORIFICES. TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
R R R (1) Apply masking paper or masking tape BONDING AND ADHESIVE COMPOUNDS (Material No. 08-074) on the equipment and fittings adjacent to the area.
(2) Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspected area.
(3) Remove the masking paper or the masking tape.
R Aft Avionics-Compartment Access Door 824 - Internal Structure Figure 601/TASK 52-41-14-991-002
1EFF : ALL 1 52-41-14Page 604 1 1 May 01/03 1 1 1CES 1
5. Close-up
________
Subtask 52-41-14-865-054
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 46WV
Subtask 52-41-14-410-052
B. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) Close the aft avionics compartment door 824 (Ref. TASK 52-41-00-410-002).
(3) Remove the access platform(s).
1EFF : ALL 1 52-41-14Page 605 1 1 May 01/03 1 1 1CES 1
DOOR - ACCESSORY COMPARTMENT ACCESS - REMOVAL/INSTALLATION
__________________________________________________________ TASK 52-41-16-000-001 Removal of the Accessory Compartment Access Door 312AR
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門6(152)
