(e)
 Flush with water. Dry with filtered compressed air. Keep for 12 hours at the ambient temperature.

 NOTE : Apply the paint as soon as possible when the part is dry.
____
 Subtask 32-21-00-150-051
 C. Removal of corrosion on steels 35 NCD16-35CD4 and TS less than 1450 MPa. (Rotating tube, NLG actuating cylinder, lock link, lower arm, brace-strut lower-arm).
 (1) Treatment of the areas with corrosion
 -Clean the areas with corrosion with CLEANING AGENTS (Material No. 11-002)
 -Make sure that the paint is in the correct condition and mark the area of corrosion
 -Rub the oxidized areas with abrasive paper.
 -Degrease with the CLEANING AGENTS (Material No. 11-003).
 NOTE : The depth of the material removed during the treatment must
____ not change the mechanical strength of the part. If you are not sure, send the part to be repaired.
 (2) Removal of Corrosion - Passivation
 -Apply SPECIAL MATERIALS (Material No. 05-006) with no water with a brush to the areas with corrosion until :
 -the oxide is fully changed
 -it becomes crystalline
 -Apply a protective finish by the DALIC (cadmium plating) or other method.
 NOTE : Apply the paint as soon as possible when the part is dry.
____
 1EFF : ALL 1 32-21-00Page 706 1 1 Feb 01/98 1 1 1CES 1 Subtask 32-21-00-150-052

 D. Removal of corrosion on steel 35NCD16-35CD4 and TS more than or equal to 1450 MPa (Integral axle/sliding rod).
 (1)
 Treatment of areas with corrosion

 -Clean the areas with corrosion with CLEANING AGENTS (Material No. 11-002)
 -Make sure that the paint is in the correct condition and mark the areas with corrosion
 -Degrease with the CLEANING AGENTS (Material No. 11-003).

 (2)
 Removal of Corrosion - Passivation

 -Rub the oxidized areas with abrasive paper.
 NOTE : The depth of the material removed during the treatment must

____ not change the mechanical strength of the part. If you are not sure, send the part to be repaired.
 -Degrease with the CLEANING AGENTS (Material No. 11-003)
 -Apply a protective finish by the DALIC (cadmium plating) or other method.
 NOTE : Apply the paint as soon as possible when the part is dry.
____ R **ON A/C 001-049, 052-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 32-21-00-370-050
 E. Touching-up Paint that is resistant to Skydrol
 (1) Preparation of the areas to be painted
 (a)
 Clean the surfaces to be painted with CLEANING AGENTS (Material No. 11-002). Dry them with clean, filtered compressed air.

 (b)
 Apply the STRIPPERS (Material No. 12-005) with a paint brush. If it is necessary, use a brush on the surface.

 (c)
 If you do this operation in a building, make sure that the work area is open to the air.

 (d)
 Do not let the material touch the surfaces for more than 5 hours. CAUTION : THE MATERIAL MUST NOT TOUCH RUBBER, PLASTICS OR

_______
 ASSEMBLY AREAS.

 1EFF : ALL 1 32-21-00Page 707 1 1 Aug 01/05 1 1 1CES 1

 (e)
 Flush with water, under pressure if it is possible until all the paint and cleaning product are removed.

 (f)
 Dry, then clean and degrease with a chlorine-base solvent. Make sure that the surfaces have no oxidation.

 (2) Preparation of the Paint Mixtures
 (a)
 Primer STRUCTURE PAINTS (Material No. 16-055) NOTE : You can keep the mixture for 8 hours at 20 deg.C (68

____

 (b)
 Top-coat STRUCTURE PAINTS (Material No. 16-035) NOTE : You can keep the mixture for 6 hours at 20 deg.C (68

 deg.F).
 1_ 10 parts of primer
 2_ 10 parts of hardener
 3_ 0 to 5 parts of thinner

____ deg.F).
 1 10 parts of primer
_ 2 10 parts of hardener
_ 3 5 to 7.5 parts of thinner
_
 (3) Apply the Paint NOTE : Apply the paint with a spray gun and cover the adjacent
____ surfaces. When it is possible, the paint and the surfaces must be at the same temperature : 15 to 25 deg.C (59 to 77 deg.F). The relative humidity must be 35 to 75%.
 (a)
 Apply a layer of primer. Let it dry for 4 hours minimum.

 (b)
 Apply a layer of top-coat. Let it dry for 24 hours before you touch it.

 NOTE : The paint must dry for 8 days before it is resistant to
____ Skydrol.
R 1EFF : 001-049, 052-099, 101-149, 151-199, 1 32-21-00Page 708 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架3(68)