(4)
Manually open the forward doors of the nose landing gear.
(5)
Do again the adjustment if necessary.
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 32-22-00Page 526 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-061, 101-105, 201-203,
Subtask 32-22-00-220-052
L. Check of the NLG Doors Gaps and Mismatches
(Ref. Fig. 503/TASK 32-22-00-991-007)
(1)
Manually close the forward doors of the nose landing gear so that they touch the forward stops.
(2)
Make sure that:
-
the gap P is between 7 mm (0.2755 in.) and 9 mm (0.3543 in.).
-
the gap Q is between 0.83 mm (0.0326 in.) and 2.83 mm (0.1114 in.).
-
the gap R is between 2.5 mm (0.0984 in.) and 5.5 mm (0.2165 in.).
-
the gap S is between 0 mm (0.0000 in.) and 1.4 mm (0.0551 in.).
-
the gap T is between 4 mm (0.1574 in.) and 6 mm (0.2362 in.).
-
the gap U is between 8.5 mm (0.3346 in.) and 11.5 mm (0.4527 in.).
-
the gap V is between 5.5 mm (0.2165 in.) and 8.5 mm (0.3346 in.).
-
the gap W is between 7.5 mm (0.2952 in.) and 10.5 mm (0.4133 in.).
-
the mismatch dimension X is equal to 0 plus or minus 1 mm (0.0393 in.).
(3)
Manually open the forward doors of the nose landing gear.
(4)
Do again the adjustment if necessary.
R **ON A/C 062-099, 151-199, 204-212,
Subtask 32-22-00-220-052-A
L. Check of the NLG Doors Gaps and Mismatches
(Ref. Fig. 503A/TASK 32-22-00-991-007-A)
(1)
Manually close the forward doors of the nose landing gear so that they touch the forward stops.
(2)
Make sure that:
-
the gap P is between 7 mm (0.2755 in.) and 9 mm (0.3543 in.).
-
the gap Q is between 0.83 mm (0.0326 in.) and 2.83 mm (0.1114 in.).
-
the gap R is between 2.5 mm (0.0984 in.) and 5.5 mm (0.2165 in.).
-
the gap S is between 0 mm (0.0000 in.) and 1.4 mm (0.0551 in.).
-
the gap T is between 4 mm (0.1574 in.) and 6 mm (0.2362 in.).
-
the gap U is between 0 mm (0.0000 in.) and 3 mm (0.1181 in.).
-
the gap V is between 5.5 mm (0.2165 in.) and 8.5 mm (0.3346 in.).
-
the gap W is between 0 mm (0.0000 in.) and 3 mm (0.1181 in.).
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 32-22-00Page 527 1201-212, 1May 01/05 1 1 1CES 1
-the mismatch dimension X is equal to 0 plus or minus 1 mm (0.0393 in.).
(3)
Manually open the forward doors of the nose landing gear.
(4)
Do again the adjustment if necessary.
R **ON A/C 106-149, 213-299, 301-399, 401-499,
Subtask 32-22-00-220-052-B
L. Check of the NLG Doors Gaps and Mismatches
(Ref. Fig. 503B/TASK 32-22-00-991-007-B)
(1)
Manually close the forward doors of the nose landing gear so that they touch the forward stops.
(2)
Make sure that:
-
the gap P is between 7 mm (0.2755 in.) and 9 mm (0.3543 in.).
-
the gap Q is between 0.83 mm (0.0326 in.) and 2.83 mm (0.1114 in.).
-
the gap R is between 2.5 mm (0.0984 in.) and 5.5 mm (0.2165 in.).
-
the gap S is between 0 mm (0.0000 in.) and 1.4 mm (0.0551 in.).
-
the gap T is between 4 mm (0.1574 in.) and 6 mm (0.2362 in.).
-
the gap U is between 0 mm (0.0000 in.) and 3 mm (0.1181 in.).
-
the gap V is between 5.5 mm (0.2165 in.) and 8.5 mm (0.3346 in.).
-
the gap W is between 0 mm (0.0000 in.) and 3 mm (0.1181 in.).
-
the mismatch dimension X is between -1 mm (-0.0393 in.) and +1 mm (+0.0393 in.).
-
the mismatch dimension A is between -2 mm (-0.0787 in.) and +1 mm (+0.0393 in.).
-
the mismatch dimention B is between -1 mm (-0.0393 in.) and +1.4 mm (+0.0551 in.).
(3)
Manually open the forward doors of the nose landing gear.
(4)
Do again the adjustment if necessary.
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 32-22-00Page 528 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
**ON A/C ALL
Subtask 32-22-00-867-055
M. Extend the NLG WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
(1)
Remove the access platform(s).
(2)
Make sure that the travel range of the nose landing gear is clear.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架3(143)
