(2)
Install the MLG shock absorber (Ref. TASK 32-11-13-400-001).
1EFF : ALL 1 32-11-13Page 463 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
Subtask 32-11-13-410-054-A
A. Close Access
(1) Use the LIFTING TACKLE (460006211) to remove the MLG shock absorber from the BUILD TROLLEY.
(2) Install the MLG shock absorber (Ref. TASK 32-11-13-400-001). **ON A/C ALL
Subtask 32-11-13-860-055
B. Aircraft Maintenance Configuration
(1) If necessary, open the spare-seal activating-valve (Ref. TASK 32-11-13-860-002).
Subtask 32-11-13-942-054
C. Removal of Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-11-13Page 464 1 1 May 01/05R 1 1 1CES 1
TASK 32-11-13-000-004
Removal of the Sliding Tube Sub-Assembly of the MLG Shock Absorber
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers No specific warning notices 460006211 1 LIFTING TACKLE 460006212 1 BUILD TROLLEY 460006404 1 TORQUE ADAPTER 460006409 1 ASSEMBLY AND EXTRACTION TOOL 460007240 1 BUILD TROLLEY 460007279 1 PIN SPANNER
1EFF : ALL 1 32-11-13Page 465 1 1 May 01/05R 1 1 1CES 1
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action
29-14-00-614-001 Depressurization of the Hydraulic Reservoirs
32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears
32-11-13-000-001 Removal of the MLG Shock Absorber
R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 401-499,
32-11-13-991-011-A Fig. 405
**ON A/C 051-052,
32-11-13-991-011 Fig. 405A
**ON A/C 301-399,
32-11-13-991-011-B Fig. 405B
**ON A/C ALL
3. Job Set-up
__________
Subtask 32-11-13-941-057
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put the warning notices in the cockpit to tell persons not to operate the landing gear or the brakes.
(3)
Put the warning notices in position on the ground hydraulic services connections to tell persons not to operate:
-
the Green hydraulic system
-
the Blue hydraulic system.
1EFF : ALL 1 32-11-13Page 466 1 1 Aug 01/05 1 1 1CES 1
(4) Make sure that the safety devices are installed on the landing gear (Ref. TASK 32-00-00-481-001).
Subtask 32-11-13-860-062
B. Aircraft Maintenance Configuration
(1)
Make sure that the applicable hydraulic systems are depressurized (Ref. TASK 29-00-00-864-001).
(2)
Depressurize the applicable hydraulic reservoirs (Ref. TASK 29-14-00-614-001).
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 32-11-13-010-053-A
C. Get Access
(1)
Remove the applicable MLG shock absorber (Ref. TASK 32-11-13-000-001).
(2)
Use LIFTING TACKLE (460006211) to install the shock absorber in the BUILD TROLLEY (460006212).
**ON A/C 301-399,
Subtask 32-11-13-010-053-B
C. Get Access
(1)
Remove the applicable MLG shock absorber (Ref. TASK 32-11-13-000-001).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(33)
