(7)
Remove the access platform(s).
(8) Close the applicable MLG door (Ref. TASK 32-12-00-410-001). R **ON A/C 301-399, 401-499,
Subtask 32-11-43-410-065-A
C. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the applicable access panel 574AB, 674AB.
(3)
Install the applicable tachometers (Ref. TASK 32-42-57-400-001).
1EFF : ALL 1 32-11-43Page 463 1 1 Aug 01/05 1 1 1CES 1
(4)
Install the applicable brake fan assemblies (Ref. TASK 32-48-51-400-
005).
(5)
Install the applicable MLG wheels (Ref. TASK 32-41-11-400-006).
(6)
Remove the access platform(s).
(7) Close the applicable MLG door (Ref. TASK 32-12-00-410-001). **ON A/C ALL
Subtask 32-11-43-865-062
D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1GA, 2GA, 52GA.
Subtask 32-11-43-740-053
E. Test
(1) Do a BITE Test of the MLG system (Ref. TASK 32-69-00-740-001).
5. Close-up
________ Subtask 32-11-43-942-057
A. Removal of Equipment
(1)
Remove the warning notice(s).
(2)
Remove the safety barriers.
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-11-43Page 464 1 1 May 01/05 1 1 1CES 1 DISCONNECTION BOX - MLG - REMOVAL/INSTALLATION
______________________________________________
TASK 32-11-46-000-001
Removal of the MLG Disconnection Box
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
No specific safety barriers
No specific warning notice
No specific access platform 2.0 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears R 32-00-00-860-001 Flight Configuration Precautions with Electrical R Power
32-12-00-010-001 Open the Main Gear Doors for Access
1EFF : ALL 1 32-11-46Page 401 1 1 Feb 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 001-049, 051-060, 101-101,
32-11-46-991-001 Fig. 401 R **ON A/C 061-099, 102-149, 151-199, 201-299, 401-499,
32-11-46-991-001-A Fig. 401A
**ON A/C 301-399,
32-11-46-991-001-B Fig. 401B
**ON A/C ALL
3. Job Set-up
__________
Subtask 32-11-46-941-050-A
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control-lever 6GA is in the DOWN position
-put a warning notice in position to tell persons not to operate the landing gear.
Subtask 32-11-46-869-050-A
B. Flight Configuration Precautions
(1) If the electrical power is not necessary for other maintenance tasks, de-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002). Then it is not necessary to operate the LCGIU circuit breakers.
1EFF : ALL 1 32-11-46Page 402 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-11-46Page 403 1 1 Aug 01/05 1 1 1CES 1
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(125)
