R 1EFF : 001-003, 051-052, 201-207, 1 32-11-43Page 423 1 1 May 01/05 1 1 1CES 1

 (d)
 Disconnect the electrical connectors that follow:

 -21GA-A (20GA-A) (7)
 -3GW-A (2GW-A) (8)
 -15GA-A (14GA-A) (13)
 -13GG-A (12GG-A) (61)
 -17GG-A (16GG-A) (62).

 (e)
 Put blanking caps on the disconnected electrical connectors.

 (f)
 Carefully remove the 1M harness from the MLG leg.

 (2) For the 2M harness:
 (Ref. Fig. 406/TASK 32-11-43-991-010)

 (a)
 Disconnect the electrical connector 4029VC (4030VC) (1).

 (b)
 Loosen the center nut (92).

 (c)
 Remove and retain the plug (91).

 (d)
 Remove the 2M harness from the liner (90). (Ref. Fig. 404/TASK 32-11-43-991-003)

 (e)
 Remove the nuts (56), the washers (57) and the bolts (59) to release the cable support (58) from the bracket (55).

 (f)
 Disconnect the electrical connector LGAB3 (LGAB4) (10).

 (Ref. Fig. 401/TASK 32-11-43-991-001) R **ON A/C 001-002, 051-052,
 (Ref. Fig. 405/TASK 32-11-43-991-004) R **ON A/C 001-003, 051-052, R Post SB 32-1190 For A/C 001-002,051-052,
 (Ref. Fig. 405B/TASK 32-11-43-991-004-D)
R 1EFF : 001-003, 051-052, 1 32-11-43Page 424 1 1 May 01/05 1 1 1CES 1

 **ON A/C 001-003, 051-052,

 (g)
 Disconnect the electrical connectors that follow:

 -23GA-A (22GA-A) (11)
 -17GA-A (16GA-A) (12)
 -11GG-A (14GG-A) (60)
 -15GG-A (18GG-A) (63).

 (h)
 Put blanking caps on the disconnected electrical connectors.

 (i)
 Carefully remove the 2M harness from the MLG leg.

R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 32-11-43-020-061-A
 B. Removal of the 1M and 2M Harnesses from the MLG Leg
 CAUTION : MAKE SURE THAT ALL ELECTRICAL CONNECTORS ARE IDENTIFIED WITH
_______ THEIR FIN NO. TO CORRECTLY CONNECT EACH PLUG TO ITS RELATED RECEPTACLE. INCORRECT CONNECTION OF THE ELECTRICAL CONNECTORS CAN CAUSE DAMAGE TO THE AIRCRAFT ELECTRICAL SYSTEM.
 (1) For the 1M harness:
 (Ref. Fig. 401A/TASK 32-11-43-991-001-A)

 (a)
 Disconnect the electrical connector 4027VC (4028VC) (2) from the MLG disconnection box (Ref. TASK 32-11-46-000-001).

 (Ref. Fig. 404A/TASK 32-11-43-991-003-A)

 (b)
 Disconnect the axle harness electrical plug from the receptacle LGAB1 (LGAB2) (18) (Ref. TASK 32-11-43-000-003).

 (c)
 Remove the nuts (53), the washers (52), the cap screws (51) and remove the electrical connector (18) from the bracket (50).

 (Ref. Fig. 401A/TASK 32-11-43-991-001-A, 405A/TASK 32-11-43-991-004-E)

 (d)
 Disconnect the electrical connectors that follow:

 -21GA-A (20GA-A) (7)
 -3GW-A (2GW-A) (8)
 -15GA-A (14GA-A) (13)
 -13GG-A (12GG-A) (61)
 1EFF : ALL 1 32-11-43Page 425 1 1 Aug 01/05 1 1 1CES 1

 -17GG-A (16GG-A) (62).
 (e)
 Put blanking caps on the disconnected electrical connectors.

 (f)
 Carefully remove the 1M harness from the MLG leg.

 (2) For the 2M harness: (Ref. Fig. 406/TASK 32-11-43-991-010)
 (a)
 Disconnect the electrical connector 4029VC (4030VC) (1).

 (b)
 Loosen the center nut (92).

 (c)
 Remove and retain the plug (91).

 (d)
 Remove the harness from the liner (90).
 (Ref. Fig. 404A/TASK 32-11-43-991-003-A)

 (e)
 Disconnect the axle harness electrical plug from the receptacle LGAB3 (LGAB4) (10) (Ref. TASK 32-11-43-000-003).

 (f)
 Remove the nuts (54), the washers (55), the cap screws (56) and remove the electrical connector (10) from the bracket (57).

 (Ref. Fig. 401A/TASK 32-11-43-991-001-A, 405A/TASK 32-11-43-991-004-E)

 (g)
 Disconnect the electrical connectors that follow:

 -23GA-A (22GA-A) (11)
 -17GA-A (16GA-A) (12)
 -11GG-A (14GG-A) (60)
 -15GG-A (18GG-A) (63).

 (h)
 Put blanking caps on the disconnected electrical connectors.

 (i)
 Carefully remove the 2M harness from the MLG leg.

R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 32-11-43Page 426 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL

 TASK 32-11-43-400-002
 Installation of the 1M and 2M Harnesses on the MLG Leg
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(114)