MLG Harnesses 1M and 2M Figure 401A/TASK 32-11-43-991-001-A
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 32-11-43Page 408 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Location and Detail
Figure 402/TASK 32-11-43-991-037
R 1EFF : 001-003, 051-052, 1 32-11-43Page 409 1 1 May 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Location and Detail Figure 402A/TASK 32-11-43-991-037-B
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 32-11-43Page 410 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Location and Detail
Figure 403/TASK 32-11-43-991-002
R 1EFF : 001-003, 051-052, 1 32-11-43Page 411 1 1 May 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Location and Detail Figure 403A/TASK 32-11-43-991-002-A
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 32-11-43Page 412 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Location and Detail
Figure 404/TASK 32-11-43-991-003
R 1EFF : 001-003, 051-052, 1 32-11-43Page 413 1 1 May 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Location and Detail Figure 404A/TASK 32-11-43-991-003-A
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 32-11-43Page 414 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Detail at the Normal-Brake Servovalve Manifold
Figure 405/TASK 32-11-43-991-004
R 1EFF : 001-002, 051-052, 1 32-11-43Page 415 1 1 May 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Detail at the Normal-Brake Servovalve Manifold
Figure 405A/TASK 32-11-43-991-004-E
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 32-11-43Page 416 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 001-003, 051-052, R Post SB 32-1190 For A/C 001-002,051-052, (Ref. Fig. 405B/TASK 32-11-43-991-004-D) **ON A/C ALL
(Ref. Fig. 406/TASK 32-11-43-991-010) R **ON A/C 001-003, 051-052,
Subtask 32-11-43-020-058
A. Preparation for Removal of the 1M and 2M Harnesses
(Ref. Fig. 401/TASK 32-11-43-991-001)
WARNING : CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE
_______
LOCKWIRE CAN CUT OR BLIND YOU.
(1)
Remove and discard the lockwire from the locknuts (4) and (6).
(2)
Loosen the upper locknuts (6) to release the 1M and 2M harnesses from the brackets (5).
(3)
Loosen the upper locknut (4) to release the 2M harness from the bracket (3).
(Ref. Fig. 402/TASK 32-11-43-991-037)
(4)
Remove the nuts (17), the washers (15) and the bolts (14) to release the P clips (16).
(Ref. Fig. 401/TASK 32-11-43-991-001)
(5)
Remove and discard the cable tie (18) and remove the grommet (19). (Ref. Fig. 403/TASK 32-11-43-991-002)
(6)
Remove and discard the lockwire from the screws (32).
(7)
Loosen the screws (32).
1EFF : ALL 1 32-11-43Page 417 1 1 May 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Detail at the Normal-Brake Servovalve Manifold
Figure 405B/TASK 32-11-43-991-004-D
R 1EFF : 001-003, 051-052, 1 32-11-43Page 418 1 1 May 01/05 1 1 1CES 1
MLG Harnesses 1M and 2M - Location and Detail Figure 406/TASK 32-11-43-991-010
R 1EFF : 1 1 1CES ALL 1 111 32-11-43 Page 419 Nov 01/04
(8)
Carefully remove the band-clamps (33) from the MLG leg assembly. NOTE : When the band-clamps (33) are removed, make sure that the
____ line-support blocks stay in position on the harnesses.
(9)
Remove the nuts (34), the washers (35) and the bolts (37). Remove the clamps (36).
(10) Remove the nuts (38), the washers (39) and the bolts (41). Remove the clamps (40).
R **ON A/C 004-049, 053-099, 101-149, 151-199, 208-299, 301-399, 401-499, 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(112)
