(1)
 Put the access platform in position at the applicable zone 731(741).

 (2)
 Put the 2 l (0.5 USgal) containers below the unions (1), (14), (15) and (28).

 (3)
 Disconnect the hydraulic hoses (29), (32), (65) and (66) at the MLG/airframe interface (Ref. TASK 32-11-11-000-001).

 (4)
 Disconnect the applicable hydraulic hoses at the MLG/wheel brake interface (Ref. TASK 32-42-27-000-001).

 (5) Put blanking plugs on the disconnected line ends.
 **ON A/C ALL

 4. Procedure
_________
 **ON A/C 001-003, 051-052,

 (Ref. Fig. 401/TASK 32-11-12-991-001) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 401A/TASK 32-11-12-991-001-A)
 **ON A/C 001-003, 051-052,

 (Ref. Fig. 402/TASK 32-11-12-991-002) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 402A/TASK 32-11-12-991-002-A)
 **ON A/C 001-003, 051-052,

 (Ref. Fig. 403/TASK 32-11-12-991-003) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 403A/TASK 32-11-12-991-003-A)
 1EFF : ALL 1 32-11-12Page 414 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 001-003, 051-052,

 (Ref. Fig. 404/TASK 32-11-12-991-004) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 404A/TASK 32-11-12-991-004-A)
 **ON A/C 001-003, 051-052,

 (Ref. Fig. 405/TASK 32-11-12-991-005) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 405A/TASK 32-11-12-991-005-A)
 **ON A/C 001-003, 051-052,

 Subtask 32-11-12-020-050-C
 A. Removal of the MLG Hydraulic Dressings WARNING : DO NOT GET THE FLUID ON YOUR SKIN OR IN YOUR EYES. IF YOU DO:
_______
 -FLUSH IT AWAY WITH CLEAN WATER
 -GET MEDICAL AID. CAUTION : MAKE SURE THAT THE FLUID DOES NOT STAY ON THE AIRCRAFT
_______ STRUCTURE. IF THE FLUID GETS ON THE AIRCRAFT STRUCTURE, WASH IT OFF IMMEDIATELY WITH SOAP AND WATER.
 NOTE : Install the blanking plugs immediately after you remove the
____ applicable flexible hydraulic hoses and rigid pipes.
 (1) To remove the flexible hydraulic hoses, do the steps that follow: WARNING : CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK.
_______ LOOSE LOCKWIRE CAN CUT OR BLIND YOU.
 (a) Remove and discard the lockwire from the unions (7), (8), (22) and (23).
 1EFF : ALL 1 32-11-12Page 415 1 1 Aug 01/05 1 1 1CES 1

 MLG Hydraulic Dressings - Location and Detail
 Figure 405/TASK 32-11-12-991-005

R 1EFF : 001-003, 051-052, 1 32-11-12Page 416 1 1 May 01/05 1 1 1CES 1

 MLG Hydraulic Dressings - Location and Detail Figure 405A/TASK 32-11-12-991-005-A
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 32-11-12Page 417 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 (b)
 Loosen the unions (7), (8), (22) and (23) to let the hydraulic fluid drain.

 (c)
 Remove and discard the cotter pins (1). Remove the nuts (2), the washers (3), the bolts (4), the washers (5) and the line support block assemblies (6).

 (d)
 Disconnect the unions (7) and (8). Remove the flexible hoses (9) and (14).

 (e)
 Remove and discard the cotter pins (15). Remove the nuts (16), the washers (17), the bolts (18), the washers (19) and the line support block assemblies (20).

 (f)
 Disconnect the unions (22) and (23). Remove the flexible hoses

 (21) and (24).

 (g)
 Remove the nuts (54), the washers (55) and the bolts (52). Remove the line support block assembly (53).

 (h)
 Remove the nuts (47), the washers (48) and the bolts (50). Remove the channels (51) and the blocks (49).

 (i)
 Remove the nuts (34), the washers (35) and the bolts (37). Remove the channels (33) and the blocks (36).

 (j)
 Disconnect the unions (25) and (81) and remove the flexible hose (26).

 (k)
 Disconnect the unions (28) and (82) and remove the flexible hose (27).

 (l)
 Remove the nuts (43), the washers (44) and the bolts (46). Remove the line support block assembly (45).

 (m)
 Remove the nuts (38), the washers (42) and the bolts (40). Remove the channels (39) and the blocks (41).

 (n)
 Disconnect the unions (10) and (84) and remove the flexible hose (11).

 (o)
 Disconnect the unions (13) and (85) and remove the flexible hose (12).

 (p)
 Disconnect the union (31) and remove the flexible hose (30).

 (q)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架2(2)