曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  YOUR IN-SERVICE DATA TO FIND THE NUMBER OF SERVICES BEST ADAPTED TO 
R  YOUR AIRCRAFT). 
R  1. Reason for the Job__________________ 
R  Self Explanatory 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  safety barriers 
R  No specific  warning notice 
R  No specific  access platform 2.5 m (8 ft. 2 in.) 
R  No specific  Torque Wrench : range 0.00 to 1.20 m.daN 
R  (0.00 to 9.00 lbf.ft) 
R  No specific  Torque Wrench : range 0.20 to 3.60 m.daN 
R  (2.00 to 26.00 lbf.ft) 
R  460006437  1 TOOL-HOLDING

 

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R  Material No. 04-004  USA MIL-PRF-23827 TYPE I 
R  SYNTH.ESTER BASED GREASE HIGH PRESSURE 
R  (Ref. 20-31-00) 
R  Material No. 04-022  USA MIL-PRF-81322 GRADE 2 
R  SYNTHE.HYDROCARBON GREASE HIGH PRESSURE 
R  (Ref. 20-31-00) 
R  Material No. 09-016  USA MIL-PRF-81733D TYPE II CLASS B 
R  CORROSION INHIBITING FILLET CONSISTENCY 
R  (Ref. 20-31-00) 
R  Material No. 11-026  GB DEF-STAN 68-148/1 
R  SOLVENT GENERAL PURPOSE (Ref. 20-31-00) 
R  Material No. 19-003  USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 

R C. Expendable Parts
R -------------------------------------------------------------------------------R FIG.ITEM |DESIGNATION |IPC-CSN R -------------------------------------------------------------------------------
R  5  cotter pin 
R  5  cotter pin 
R  5  cotter pin 
R  11  tab washer 
R  11  tab washer 
R  D. Referenced Information 

32-11-17 01 -030 32-11-17 01A-030 32-11-17 01B-030 32-11-18 02B-050 32-11-18 02E-050
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R  12-22-32-640-001 
R  29-10-00-864-001 
R  29-10-00-864-002 
R  29-14-00-614-001 
R  29-23-00-860-001 
R 
R  32-00-00-481-001 
R 

Lubrication of the MLG and Doors Depressurize the Green Hydraulic System Depressurize the Yellow Hydraulic System Depressurization of the Hydraulic Reservoirs Disconnection of the Isolation Coupling of the Power Transfer Unit (PTU) Installation of the Safety Devices on the Landing Gears
 1EFF : ALL 1 32-00-00Page 240 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

R  32-00-00-481-002  Installation of the Safety Devices on the Landing 
R  Gear Doors 
R  32-11-00-220-003  Detailed Dimensional Check of the MLG Lockstay 
R  Assembly 
R  32-11-19-081-001  Removal of the MLG Spring-Expander Tool 
R  SIL 12-008  (for corrective action) 
R  32-00-00-991-006  Fig. 205 
R  32-00-00-991-007  Fig. 206 
R  3. Job Set-up__________ 
R  Subtask 32-00-00-941-061 
R  A. Safety Precautions 

R  (1) Make sure that the safety barriers are in position. 
R  (2) Make sure that the ground safety locks are installed on the landing 
R  gear and the landing gear doors (Ref. TASK 32-00-00-481-001) and 
R  (Ref. TASK 32-00-00-481-002). 
R  (3) On the panel 400VU: 
R  - make sure that the landing-gear control-lever 6GA is in the DOWN 
R  position 
R  - make sure that a warning notice is in position to tell persons not 
R  to operate the landing gear. 
R  (4) Make sure that a warning notice is in position to tell persons not to 
R  pressurize the Green and Yellow hydraulic systems. 
R  Subtask 32-00-00-860-059 
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架1(89)