(d)
Extend the mini-hoist lifting cables and connect them to the lifting beam (105).
(e)
Release the safety catches on the .
(f)
Attach the drive-link between the forward rail assembly (110) and the aft rail assembly (108).
**ON A/C ALL
4. Procedure
_________
(Ref. Fig. 401/TASK 32-11-11-991-006) **ON A/C 001-049, 051-061, 101-105, 201-203,
(Ref. Fig. 402/TASK 32-11-11-991-027) **ON A/C 301-399,
(Ref. Fig. 402A/TASK 32-11-11-991-027-B)
R 1EFF : ALL 1 32-11-11Page 444 1 1 Aug 01/05 1 1 1CES 1
R **ON A/C 001-049, 062-099, 101-149, 151-199, 201-299, 401-499, Post SB 32-1213 For A/C 001-049,101-105,201-203, (Ref. Fig. 402B/TASK 32-11-11-991-027-A) **ON A/C ALL
(Ref. Fig. 403/TASK 32-11-11-991-023, 404/TASK 32-11-11-991-013-A, 405/TASK 32-11-11-991-014, 406/TASK 32-11-11-991-008)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 407/TASK 32-11-11-991-009)
**ON A/C 301-399,
(Ref. Fig. 407A/TASK 32-11-11-991-009-A)
**ON A/C 001-003, 051-052,
Subtask 32-11-11-420-063-A
A. Preparation for Installation
(1)
Use a clean MISCELLANEOUS (Material No. 19-003), made moist with CLEANING AGENTS (Material No. 11-026) to clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
(3)
Make sure that all the identification plates and labels on the MLG are correctly installed and show the correct data (Ref. TASK 11-00-00-400-012).
(4)
Make sure that the parts retained from the removed components are clean and in the correct condition.
(5)
Remove the MLG forward pintle bearing (Ref. TASK 57-26-13-000-001).
(6)
Clean the MLG forward pintle bearing with a MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026).
R 1EFF : ALL 1 32-11-11Page 445 1 1 Aug 01/05 1 1 1CES 1
Installation of the Half-Seals
Figure 407/TASK 32-11-11-991-009
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-11-11Page 446 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Installation of the Half-Seals
Figure 407A/TASK 32-11-11-991-009-A
R 1EFF : 301-399, 1 32-11-11 Page 447
1 1 Aug 01/05
1 1
1CES 1
(7)
Make sure that the grease channels to the MLG pintle bearing are clear.
(8)
Install the MLG forward pintle bearing (Ref. TASK 57-26-13-400-001).
(9)
Do a visual inspection of the MLG rear pintle pin (Ref. TASK 57-51-00-200-001).
(10) Do a visual inspection of the spherical bearing of the MLG rear pintle pin:
(a)
Look at the sealant that covers the bearing assembly for breaks or cracks. Broken or cracked sealant is an indication of movement or loose items.
(b)
Do an inspection of the bearing and its retaining nut for signs of movement.
(c)
Do an inspection of the bearing retaining bolt for signs of movement and make sure it is not loose.
(d)
If you find signs of movement of the bearing, do a detailed inspection of the bearing assembly (Ref. CMM 32-11-33).
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 401-499,
Subtask 32-11-11-420-063-B
A. Preparation for Installation
(1)
Use a MISCELLANEOUS (Material No. 19-003), made moist with CLEANING AGENTS (Material No. 11-026) to clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
(3)
Make sure that all the identification plates and labels on the MLG are correctly installed and show the correct data (Ref. TASK 11-00-00-400-012).
(4)
Make sure that the parts retained from the removed components are clean and in the correct condition.
(5)
Remove the MLG forward pintle bearing (Ref. TASK 57-26-13-000-001).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-11-11Page 448 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
(6)
Clean the MLG forward pintle bearing with a MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026).
(7)
Make sure that the grease channels to the MLG pintle bearing are clear.
(8)
Install the MLG forward pintle bearing (Ref. TASK 57-26-13-400-001).
(9)
Do a visual inspection of the MLG rear pintle pin (Ref. TASK 57-51-00-200-001).
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架1(128)
