R 1EFF : 001-049, 062-099, 101-149, 151-199, 1 32-11-11Page 432 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL

 TASK 32-11-11-400-001
 Installation of the MLG Leg Assembly
 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______ NOTICES ARE IN POSITION.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
 CAUTION : WHEN YOU DO A MAINTENANCE TASK THAT USES COMMON GREASE, USE ONLY
_______ GREASES OF THE SAME SPECIFICATION (IT IS PERMITTED TO USE DIFFERENT BRANDS IF THEIR SPECIFICATIONS ARE THE SAME). DO NOT MIX GREASES THAT HAVE CLAY THICKENERS WITH GREASES THAT HAVE LITHIUM THICKENERS. THIS MIXTURE CAN CHANGE THE LUBRICATION PROPERTIES OF THE GREASE. IF YOU USE GREASES OF DIFFERENT TYPES (SPECIALLY THOSE WITH CLAY THICKENERS AND LITHIUM THICKENERS), DECREASE THE SERVICE INTERVALS OF THE AIRCRAFT (BY HALF, FOR EXAMPLE) SPECIFIED IN THE MAINTENANCE PLANNING DOCUMENT. DO THIS FOR APPROXIMATELY THREE OR FOUR SERVICES (REFER TO YOUR IN-SERVICE DATA TO FIND THE NUMBER OF SERVICES BEST ADAPTED TO YOUR AIRCRAFT).
 1. Reason for the Job__________________
 Self Explanatory
 1EFF : ALL 1 32-11-11Page 433 1 1 Aug 01/05R 1 1 1CES 1

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific No specific No specific No specific No specific No specific
No specific
CFD1142-00-000 CFD1142-10-000 CFD1142-20-000 CFD1142-40-000
R  D23080000 460005833 460005835 460007280 98D32104002000 98D32104002001 98D32104002002 98D32104002003 98D32104005000 98D32104010000 98D32104010001 98D32104080000 98D32104081000 98D32104180000 98D32104190001 98D32104190002 98D32203502000 98D57004009000
feeler gage
ground hydraulic cart
plastic string
safety barriers
adjustable access platforms 2 m (6 ft. 7 in.)
Torque Wrench : range 0.00 to 1.20 m.daN

 (0.00 to 9.00 lbf.ft)Torque Wrench : range 2.00 to 20.00 m.daN
 (15.00 to 150.00 lbf.ft)1111 1 GROUND SAFETY LOCK1 GROUND LOCK SLEEVE1 GROUND LOCK SLEEVE1 GROUNDLOCK SLEEVE1 EQUIPMENT - MLG R/I1 EQUIPMENT - MLG R/I1 EQUIPMENT - MLG R/I1 EQUIPMT R/I MLG1 SPANNER-MLG REAR PINTLE1 INTERFACE BRACKET1 BRACKET ASSY I/FACE1 SPANNER - MLG REAR PIN1 TOOL - SPHERICAL LOCATION1 TOOL-SPHERICAL LOCATION1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)1 SAFETY PIN - NLG DOOR1 TOOL-PINTLE BEARING ALIGNMENT (MLG)
 1EFF : ALL 1 32-11-11Page 434 1 1 Aug 01/05 1 1 1CES 1 B. Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004  USA MIL-PRF-23827 TYPE I
 SYNTH.ESTER BASED GREASE HIGH PRESSURE
 Material No. 04-022  (Ref. 20-31-00)USA MIL-PRF-81322 GRADE 2
 SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
 Material No. 05-002  (Ref. 20-31-00)USA MIL-P-8116
 Material No. 05-047  PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)C Z-11.904
 Material No. 09-016  ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT) (Ref. 20-31-00)USA MIL-PRF-81733D TYPE II CLASS B
 CORROSION INHIBITING FILLET CONSISTENCY
 Material No. 09-018  (Ref. 20-31-00)USA AMS 3267/3 CORROSION INHIBITING LOW ADHESION SEALANT
 Material No. 11-026 Material No. 15-008  (Ref. 20-31-00)GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)AIB TN 10138 TYPE II GRADE 2
 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND
 Material No. 16-016  (Ref. 20-31-00)C Z-12.383
 Material No. 16-021  EXTERNAL DECORATION PAINT (Ref. 20-31-00)F ASNB70720
 Material No. 19-003  FLEXIBLE POLYURETHANE (Ref. 20-31-00)USA AMS 3819
 Material No. 19-010  LINT-FREE COTTON CLOTH (Ref. 20-31-00)USA AMS 5687
 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
 (Ref. 20-31-00)

 1EFF : ALL 1 32-11-11Page 435 1 1 Aug 01/05R 1 1 1CES 1

 C. Expendable Parts -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
16  wire  32-11-05 06B-015
 22  O-rings  32-11-05 06B-080
 23  O-rings  32-11-05 06B-080
 28  washer  32-11-11 66A-100
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架1(124)