(4)
Put the sleeve (15) in position in the fixed bush and make sure that:
-
it moves freely in the fixed bush
-
it is installed in the fully aft position.
(5)
Lubricate the new O-ring (36) with COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material No. 04-022).
(6)
Apply a thin layer of COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material No. 04-022) to the internal surface of the spherical bearing.
(7)
Install the new O-ring (36) in the internal groove of the spherical bearing.
(8)
Use the TOOL-PINTLE BEARING ALIGNMENT (MLG) (98D57004009000) to align the spherical bearing in the forward pintle mounting.
(9)
Operate the EQUIPMENT - MLG R/I to lift the MLG leg assembly for installation to the wing:
(a)
Operate the mini-hoists (113) and (114) and lift the MLG leg until the MLG forward pintle is level with its mounting.
(b)
Carefully turn the drive-link so that the MLG leg moves outboard until it aligns with the pintle mounting.
(c)
Remove the connecting bar and drive the gearboxes one at a time, to get the correct alignment.
R 1EFF : 001-049, 062-099, 101-149, 151-199, 1 32-11-11Page 454 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 32-11-11-480-052
C. Installation of Support Equipment
(1) Install the TOOL - R/I (MLG FWD AND REAR PINTLE PINS) (98D32104190001) between the forward and the rear pintles and set to install the forward pintle pin (27).
**ON A/C 301-399,
Subtask 32-11-11-480-052-A
C. Installation of Support Equipment
(1) Install the TOOL - R/I (MLG FWD AND REAR PINTLE PINS) (98D32104190002) between the forward and the rear pintles and set to install the forward pintle pin (31).
**ON A/C 001-049, 051-061, 101-105, 201-203,
Subtask 32-11-11-420-061
D. Installation of the Pintle Pins CAUTION : YOU MUST INSTALL THE FORWARD PINTLE PIN FIRST, BEFORE YOU
_______
INSTALL THE REAR PINTLE PIN.
NOTE : In the procedure that follows, make sure that the Materials No.
____ 04-004 and No. 04-022 are not mixed together. Do not use them at the same time (Ref. SIL 12-008).
(1)
Apply COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material No. 04-022) to the forward pintle pin (27).
(2)
Install the forward pintle pin (27) with TOOL - R/I (MLG FWD AND REAR PINTLE PINS).
(3)
Set the TOOL - R/I (MLG FWD AND REAR PINTLE PINS) to install the rear pintle pin (20).
R 1EFF : ALL 1 32-11-11Page 455 1 1 Aug 01/05 1 1 1CES 1
(4)
Set the sleeve (15) in the forward position (this aligns the spherical bearing in the MLG rear pintle with the rear pintle mounting) and install the TOOL-SPHERICAL LOCATION (98D32104180000).
(5)
Apply a light layer of COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material No. 04-022) to the external surface of the rear pintle pin (20) (detail B).
NOTE : Do not apply grease to:
____
-
the internal surfaces of the sleeve (15)
-
the threads of the rear pintle pin (20).
(6)
Install the rear pintle pin (20) with the TOOL - R/I (MLG FWD AND REAR PINTLE PINS).
(7)
Remove the TOOL - R/I (MLG FWD AND REAR PINTLE PINS) from the MLG leg assembly.
(8) Remove the TOOL-SPHERICAL LOCATION from the rear pintle mounting. R **ON A/C 062-099, 106-149, 151-199, 204-299, 401-499,
Subtask 32-11-11-420-061-A
D. Installation of the Pintle Pins CAUTION : YOU MUST INSTALL THE FORWARD PINTLE PIN FIRST, BEFORE YOU
_______
INSTALL THE REAR PINTLE PIN.
NOTE : In the procedure that follows, make sure that the Materials No.
____ 04-004 and No. 04-022 are not mixed together. Do not use them at the same time (Ref. SIL 12-008).
(1)
Apply COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material No. 04-022) to the forward pintle pin (27).
(2)
Install the forward pintle pin (27) with TOOL - R/I (MLG FWD AND REAR PINTLE PINS).
(3)
Set the TOOL - R/I (MLG FWD AND REAR PINTLE PINS) to install the rear pintle pin (20).
(4)
Set the sleeve (15) in the forward position (this aligns the spherical bearing in the MLG rear pintle with the rear pintle mounting) and install the TOOL-SPHERICAL LOCATION (98D32104180000).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-11-11Page 456 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架1(131)
