B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
Power 25-62-49-000-001 Inflation Reservoir, Escape-Slide - Removal 33-51-11-000-001 Removal of the Cabin Emergency Lights 33-51-13-000-001 Removal of the Cabin Wall-Mounted
Emergency-Exit-Markers 33-51-16-000-001 Removal of the Emergency Exit Sign 52-22-00-010-001 Opening of the Emergency Exit Doors from the
Passenger Compartment 25-23-47-991-009 Fig. 403
3. Job Set-up
__________
Subtask 25-23-47-861-076
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. TASK 24-42-00-861-001)
Subtask 25-23-47-010-078
B. Get Access
(1)
Put the access platform in position on the related emergency exit door.
(2)
Open the related emergency exit door (Ref. TASK 52-22-00-010-001).
(3)
Remove the emergency exit sign 46WL (Ref. TASK 33-51-16-000-001)
(4)
Remove the cabin emergency light 34WL (Ref. TASK 33-51-11-000-001)
(5)
Remove the cabin-wall mounted emergency-exit-marker 90WL4 (Ref. TASK 33-51-13-000-001)
Subtask 25-23-47-865-062
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU COM/CIDS/DEU B/ESS 153RH G03 49VU LIGHTING/EMER LT/CABIN 2WL H06 49VU LIGHTING/EMER LT/CABIN 1WL H05
122VU LIGHTING/CABIN/EMER/LT 3WL V07
4. Procedure
_________
(Ref. Fig. 403/TASK 25-23-47-991-009) Subtask 25-23-47-020-063
A. Removal of the Escape Slide Lever Cover (1)
(Ref. Fig. 403/TASK 25-23-47-991-009)
(1)
Remove the screws (2), (3), the washers (4) and the escape slide lever cover (1) in the sequence as shown.
(2)
Identify the position of the screws for the installation procedure.
Door Frame Linings - Emergency Exit, zone 232
Figure 403/TASK 25-23-47-991-009- 12 (SHEET 1)
CES
Door Frame Linings - Emergency Exit, zone 232
Figure 403/TASK 25-23-47-991-009- 22 (SHEET 2)
CES Subtask 25-23-47-020-083
B. Removal of the Hook (5)
(Ref. Fig. 403/TASK 25-23-47-991-009)
(1)
Remove the screws (6), the washers (7) and the hook (5). Subtask 25-23-47-020-064
C. Removal of the Door Frame Lining (8)
(Ref. Fig. 403/TASK 25-23-47-991-009)
(1)
Open the access panel (9)
(2)
Remove the screws (10, (12) the washers (11), (13) and the shims (14) in the sequence as shown.
(3)
Identify the position of the screws and the washers for the installation procedure.
(4)
Remove the door frame lining (8).
(5)
Remove the inflation reservoire refer to (Ref. TASK 25-62-49-000-001) Subtask 25-23-47-020-065
D. Remove the Door Frame Lining 232NX (22)
(Ref. Fig. 403/TASK 25-23-47-991-009)
(1)
Open the access panel (9).
(2)
Remove the screws (23), (25) and the washers (24), (26) in the sequence as shown.
(3)
Identify the position of the screws and the washers for the installation procedure.
Subtask 25-23-47-020-066
E. Removal of the Door Frame Lining 232YX (27)
(Ref. Fig. 403/TASK 25-23-47-991-009)
(1) Remove the screws (25), the washers (26) and the door frame lining (27).
Subtask 25-23-47-020-067
F. Removal of the Door Frame Lining (28)
(Ref. Fig. 403/TASK 25-23-47-991-009)
(1)
Loosen the clamp (29) and disconnect the hose.
(2)
Put blanking plugs on the disconnected line ends.
(3)
Remove the screws (30), the washers (31) and the door frame lining (28).
(4) Remove the screws (32), the washers (33) and the outlet (34). Subtask 25-23-47-020-068
G. Removal of the Door Frame Lining(s) 232GX (35) and/or 232KX (38)
(Ref. Fig. 403/TASK 25-23-47-991-009)
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備2(47)
