(4)
 Make sure that the sidewall-panels are aligned to each other.

 (5)
 Install the screws (7) and the plugs (8).

 (6)
 Install the washers (3) and the screws (4).

 (7)
 Clean the decor-panel (5) (Ref. TASK 12-21-12-100-004).

 EFF : ALL

25-23-43Page 413
Aug 01/05
R
 CES

 INTENTIONALLY BLANK

R  (8) Put the decor-panel (5) and the decor-cover (6) in position and make 
R  sure that the decor-cover (6) is correctly engaged.
 Subtask 25-23-43-420-054 
R  F. Installation of a 2-Frame Filler-Panel
 (Ref. Fig. 404/TASK 25-23-43-991-008) 
R  NOTE : The installation procedure is applicable for the LH and RH____ 
R  sidewall-panels. 
R  (1) Put the sidewall-panel (1) in position as recorded in the removal 
R  procedure. 
R  (2) Move the sidewall-panel (1) down and engage the yo-yo rollers in the 
R  brackets. 
R  (3) Push the lining strip (2) up between the sidewall-panel (1) and the 
R  adjacent panels, and make sure that they are correctly engaged. 
R  (4) Make sure that the sidewall-panels are aligned to each other. 
R  (5) Install the screws (4) and the covers (3).
 5. Close-up________
 Subtask 25-23-43-862-051
 A. De-energize the ground service network 
R  (Ref. TASK 24-42-00-862-001).

 EFF : ALL

25-23-43Page 415
Aug 01/00

 PANELS - LOWER SIDEWALL - REMOVAL/INSTALLATION
______________________________________________
 TASK 25-23-44-000-001 Removal of the Lower Sidewall Panels
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
 Power 25-21-41-000-001 Removal of the Passenger Seats 25-23-44-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 25-23-44-861-053
 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001)

 Subtask 25-23-44-010-050
 B. Get Access
 (1) If necessary remove the passenger seats in the area of the panels you will remove. (Ref. TASK 25-21-41-000-001)
 4. Procedure
_________ Subtask 25-23-44-020-050
 A. Remove the panel (2)
 (Ref. Fig. 401/TASK 25-23-44-991-001)

 (1)
 Use a punch to release the center pins of the quick release pins (1).

 (2)
 Pull the lower edge of the panel (2) away from the compartment wall.

 EFF : ALL

25-23-44Page 401

 Lower Sidewall Panels - Installation
 Figure 401/TASK 25-23-44-991-001
 EFF :  ALL  25-23-44 Page 402 
Feb 01/98
 CES 

 (3)
 Pull the panel (2) down and remove the fasteners (3) from the attachment fittings (4).

 (4)
 Remove the panel (2).

 EFF : ALL

25-23-44Page 403

 TASK 25-23-44-400-001 Installation of the Lower Sidewall Panels
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power 25-21-41-400-001 Installation of the Passenger Seats 25-23-44-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 25-23-44-860-050
 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the ground service network is energized
 (Ref. TASK 24-42-00-861-001)

 (2)
 Clean the component interface and/or the adjacent area.

 (3)
 Do an inspection of the component interface and/or the adjacent area.

 (4)
 Make sure that the parts retained from the removed component are clean and in the correct condition.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備2(18)