(4)
Remove the cabin emergency light 35WL (Ref. TASK 33-51-11-000-001)
(5)
Remove the cabin-wall mounted emergency-exit-marker 90WL3 (Ref. TASK 33-51-13-000-001)
Subtask 25-23-47-865-057
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU COM/CIDS/DEU B/ESS 153RH G03 49VU LIGHTING/EMER LT/CABIN 2WL H06 49VU LIGHTING/EMER LT/CABIN 1WL H05
122VU LIGHTING/CABIN/EMER/LT 3WL V07
4. Procedure
_________
(Ref. Fig. 401/TASK 25-23-47-991-008) Subtask 25-23-47-020-053
A. Removal of the End Panel (1)
(1) Remove the screw (2) and the washer (3) and release the attach brackets from the yo-yo rolls and remove the end panel (1).
Subtask 25-23-47-020-054
B. Removal of the Escape Slide Lever Cover (4)
(1) Remove the screws (5), (6), the washers (7) and the escape slide lever cover (4) in the sequence as shown. (Ref. Fig. 401/TASK 25-23-47-991-008)
(2)
Identify the position of the screws for the installation procedure. Subtask 25-23-47-020-082
C. Removal of the Hook (8)
(Ref. Fig. 401/TASK 25-23-47-991-008)
(1)
Remove the screws (9), the washers (10) and the hook (8). Subtask 25-23-47-020-055
D. Removal of the Door Frame Lining 231EX (11)
(Ref. Fig. 401/TASK 25-23-47-991-008)
(1)
Remove the screws (12) and the washers (13).
(2)
Pull upward the door frame lining (11) to release the engage brackets from the yo-yo rolls.
(3)
Remove the door frame lining (11). Subtask 25-23-47-020-056
E. Removal of the Door Frame Lining 231DX (14)
(Ref. Fig. 401/TASK 25-23-47-991-008)
(1)
Remove the screws (15).
(2)
Pull downward the door frame lining (14) to release the engage brackets from the yo-yo rolls and remove the door frame lining (14).
Subtask 25-23-47-020-057
F. Removal of the Door Frame Lining 231NX (16)
(Ref. Fig. 401/TASK 25-23-47-991-008)
(1)
Open the access panel (17)
(2)
Remove the screws (18), (20), the washers (19), (21) and the shims
(22)
in the sequence as shown.
(3)
Identify the position of the screws and the washers for the installation procedure.
(4)
Remove the door frame lining (16).
Door Frame Linings - Emergency Exit, Zone 231. Figure 401/TASK 25-23-47-991-008- 12 (SHEET 1)
EFF : 301-399, 25-23-47Page 404 Config-2 May 01/04
CES
Door Frame Linings - Emergency Exit, Zone 231. Figure 401/TASK 25-23-47-991-008- 22 (SHEET 2)
EFF : 301-399, 25-23-47Page 405 Config-2 May 01/04
CES
(5)
Remove the inflation reservoir (Ref. TASK 25-62-49-000-001). Subtask 25-23-47-020-058
G. Removal of the Door Frame Lining (29)
(Ref. Fig. 401/TASK 25-23-47-991-008)
(1)
Loosen the clamp (30) and disconnect the hose.
(2)
Put blanking plugs on the disconnected line ends.
(3)
Remove the screws (31), the washers (32) and the door frame lining (29).
(4)
Remove the screws (20), the washers (33) and the outlet (34). Subtask 25-23-47-020-059
H. Removal of the Door Frame Lining 231JX (35)
(Ref. Fig. 401/TASK 25-23-47-991-008)
(1)
Remove the screws (18),(36) and the washers (19) in the sequence as shown.
(2)
Identify the position of the screws for the installation procedure.
(3)
Push up the door frame lining (35) to release the attach brackets from the yo-yo rolls.
NOTE : Pull the upper end of the door frame lining (35) towards you
____ before you push up the door frame lining (35) to remove it.
Subtask 25-23-47-020-060
J. Removal of the Door Frame Lining(s) 231KX (41) and/or 231GX(44)
(Ref. Fig. 401/TASK 25-23-47-991-008)
(1)
Remove the screws (42) and the washers (43) and push down the door frame lining(s) (41) and/or (44) to release the attach brackets from the yo-yo rolls.
(2)
Remove the door frame lining(s) (41) and/or (44).
Subtask 25-23-47-020-061
K. Removal of the Door Frame Lining 231LX (45)
(Ref. Fig. 401/TASK 25-23-47-991-008)
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備2(41)
