曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
COM-1691 Protractor - Digital, Vertical or Horizontal
(Part #: KS5549, Supplier: 75245, A/P Effectivity: 737-ALL)
SPL-1670 Mount - Control Wheel Protractor
(Part #: F72790, Supplier: 81205, A/P Effectivity: 737-100, -200, -200C,
-300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900, -900ER,
-BBJ)
SPL-1680 Protractor - Assembly, Control Column
(Part #: 4MIT65B80307-1, Supplier: 81205, A/P Effectivity: 737-100,
-200, -200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800,
-900, -900ER, -BBJ)
(Part #: A27021-29, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900,
-900ER, -BBJ)
C. Consumable Materials
Reference Description Specification
G01912 Lockwire - Monel (0.032 In. Dia.) NASM20995N~
C32
(QQ-N-281)
D. Location Zones
Zone Area
211 Flight Compartment - Left
212 Flight Compartment - Right
562 Left Wing - Spoiler No. 5
563 Left Wing - Spoiler No. 4
564 Left Wing - Spoiler No. 3
565 Left Wing - Spoiler No. 2
662 Right Wing - Spoiler No. 8
663 Right Wing - Spoiler No. 9
664 Right Wing - Spoiler No. 10
665 Right Wing - Spoiler No. 11
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-00
Page 529
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
E. Prepare for the Adjustment
SUBTASK 27-61-00-860-033
(1) Do this task: Supply Electrical Power, TASK 24-22-00-860-811.
SUBTASK 27-61-00-860-034
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(2) Do this task: Speed Brake Hydraulic Systems A and B Pressurization,
TASK 27-62-00-800-801.
SUBTASK 27-61-00-480-007
(3) Install the mount, SPL-1670 and the control column assembly protractor, SPL-1680 on the
captain’s aileron control wheel.
SUBTASK 27-61-00-860-035
(4) Put the ailerons in the neutral position.
SUBTASK 27-61-00-480-008
(5) Adjust control column assembly protractor, SPL-1680 to zero.
SUBTASK 27-61-00-860-036
(6) Move the speed brake lever to the DOWN position.
SUBTASK 27-61-00-480-031
(7) Install the protractors, COM-1691, on the flight spoilers.
NOTE: If eight protractors, COM-1691 are not available, or if all of the actuator linkages do not
need to be adjusted, you can adjust the actuator linkages two at a time. Install
protractors, COM-1691 on both of the spoilers in a symmetrical pair. You can repeat the
adjustment as needed for the other spoiler pairs. Symmetrical spoiler pairs are:
 Spoilers No. 2 and No. 11
 Spoilers No. 3 and No. 10
 Spoilers No. 4 and No. 9
 Spoilers No. 5 and No. 8
F. Spoiler Actuator Linkage Adjustment
SUBTASK 27-61-00-700-002
(1) Check the adjustment of the spoiler actuator linkages for spoilers No. 2, 3, 4, and 5.
(a) Turn the captain’s aileron control wheel fully clockwise to make sure the spoilers No. 2, 3,
4, and 5 are in the fully retracted position.
(b) Turn the control wheel 30.0 +/- 0.5 degrees counterclockwise from the neutral position.
NOTE: Do not turn the control wheel past 30.5 degrees. If you do this, return the control
wheel to neutral and move the control wheel slowly to 30.0 +/- 0.5 degrees again.
1) Make sure the spoilers No. 2, 3, 4, and 5 are extended to the positions shown in
Table 502.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-00
Page 530
Jun 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Table 502/27-61-00-993-811
Control Wheel Position (Degrees CCW) Spoiler Number Panel Position (Degrees)
30 2 3.5 +1.0/-0.0
30 3 5.5 +1.0/-0.0
30 4 10.5 +1.0/-0.0
30 5 10.5 +1.0/-0.0
SUBTASK 27-61-00-820-008
(2) If the spoilers panel positions are not in the specified limits, adjust the linkage for spoilers No. 2,
3, 4, and 5.
(a) Do this task: Extend the Trailing Edge Flaps, TASK 27-51-00-860-803.
(b) Hold the control wheel 30.0 +/- 0.5 degrees counterclockwise from the neutral position.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(9)