曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(5) To get access to the lever brake, (Figure 508).
Remove these access panels:
Number Name/Location
113AW Forward Nose Wheel Well Panel
113BW Forward Nose Wheel Well Panel
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 565
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
E. Speed Brake Lever Brake Adjustment
SUBTASK 27-62-00-200-001
(1) Adjust the secondary backlash of the speed brake lever brake.
(a) Apply a 4.5 pounds (20 newtons) load to setscrew C so that setscrew A touches the drive
(Figure 508).
(b) Place a 0.036 - 0.037 inch (0.91 - 0.94 millimeter) feeler gauge between the drive and
setscrew B.
(c) Adjust setscrew B until it is tight against the feeler gauge.
(d) Remove the feeler gauge.
(e) Place a 0.018 inch (0.46 millimeter) feeler gauge between the drive and setscrew A.
(f) Loosen the locknut on setscrew D.
(g) Apply a 1.5 pounds (6.7 newtons) load to setscrew C.
(h) Place a 0.010 - 0.011 inch (0.25 - 0.28 millimeter) between setscrew D and the adjacent shoe
face.
(i) Adjust setscrew D until it is tight against the feeler gauge.
(j) With the feeler gauge in place, tighten the locknut of setscrew D.
(k) Remove the feeler gauge.
(l) Place a 0.018 inch (0.46 millimeter) feeler gauge between the drive and setscrew B.
(m) Loosen the locknut on setscrew C.
(n) Apply a 1.5 pounds (6.7 newtons) load to setscrew D.
(o) Place a 0.010 - 0.011 inch (0.25 - 0.28 millimeter) between setscrew C and the adjacent shoe
face.
(p) Adjust setscrew C until it is tight against the feeler gauge.
(q) With the feeler gauge in place, tighten the locknut of setscrew C.
(r) Remove the feeler gauge.
SUBTASK 27-62-00-200-002
(2) Verify the total primary backlash of the speed brake lever brake.
(a) Apply a 1.5 pounds (6.7 newtons) load to setscrew D.
(b) Verify that the total primary backlash at setscrew C is between 0.020 - 0.023 inches (0.51 -
0.58 millimeters).
(c) Apply a 1.5 pounds (6.7 newtons) load to setscrew C.
(d) Verify that the total primary backlash at setscrew D is between 0.020 - 0.023 inches (0.51 -
0.58 millimeters).
(e) If the total primary backlash of at setscrew C or setscrew D is not between 0.020 - 0.023
inches (0.51 - 0.58 millimeters), then repeat the secondary backlash adjustment procedure
until the total primary backlash is within the limits.
SUBTASK 27-62-00-860-222
(3) Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 9 C00440 FLIGHT CONTROL AUTO SPEED BRAKE
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 566
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-62-00-820-005
(4) Do this task: Speed Brake Lever Friction Test, TASK 27-62-00-800-803.
SUBTASK 27-62-00-710-002
(5) Do this task: Speed Brake Control System Operational Test, TASK 27-62-00-710-801.
SUBTASK 27-62-00-940-001
(6) Close this access panel:
Number Name/Location
112A Forward Access Door
SUBTASK 27-62-00-410-005
(7) Install these access panels:
Number Name/Location
113AW Forward Nose Wheel Well Panel
113BW Forward Nose Wheel Well Panel
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 567
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speedbrake Lever Brake Backlash Adjustment
Figure 508 (Sheet 1 of 2)/27-62-00-990-811
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 568
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speedbrake Lever Brake Backlash Adjustment
Figure 508 (Sheet 2 of 2)/27-62-00-990-811
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 569
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SPEED BRAKE CONTROL SYSTEM - INSPECTION/CHECK
1. General
A. This procedure has these inspection tasks:
(1) Speed Brake System Components
(2) Flight Spoiler and Ground Spoiler Actuators
TASK 27-62-00-210-801
2. Speed Brake System Components Inspection
(Figure 601)
A. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(78)