曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SUBTASK 27-62-00-860-017
(1) Lift the airplane with the jacks until the right main gear shock strut is fully extended. To extend,
do this task: Lift the Airplane with the Jacks, TASK 07-11-01-580-815.
SUBTASK 27-62-00-480-003
(2) Make sure you can easily install the rig pin S/B-3 from the rig pin kit, SPL-1585 through the yoke
of the interlock valve.
SUBTASK 27-62-00-820-004
(3) If you cannot easily install the rig pin S/B-3 from the rig pin kit, SPL-1585, adjust the interlock
valve cable:
(a) Remove the bolt [73], washer [74], washer [75] and nut [76] to disconnect the lower slider
assembly [77] from the right main gear upper torque link.
(b) Remove lockwire from checknut.
(c) Loosen the checknut on the lower slider assembly [77].
(d) Adjust the lower slider assembly [77] until you can easily install rig pin S/B-3 from the rig
pin kit, SPL-1585 through the yoke of the interlock valve.
(e) Make sure you can see the threads of the rod end through the inspection hole in the rod
end.
(f) Install the bolt [73], washer [74], washer [75] and nut [76] to connect the lower slider
assembly [77] to the right main gear upper torque link.
(g) Make sure rig pin S/B-3 from the rig pin kit, SPL-1585 can freely be installed.
(h) Tighten the checknut on the lower slider assembly [77].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 525
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(i) Install lockwire on checknut.
(j) Do this task: Ground Spoiler Interlock Valve Functional Test - Jacking Method,
TASK 27-62-61-400-805.
(k) Lower the airplane and remove the jacks. To lower, do this task: Lower the Airplane Off
the Jacks, TASK 07-11-01-580-816.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 526
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Ground Spoiler Interlock Valve Adjustment
Figure 504 (Sheet 1 of 2)/27-62-00-990-806
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 527
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Ground Spoiler Interlock Valve Adjustment
Figure 504 (Sheet 2 of 2)/27-62-00-990-806
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 528
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-00-820-811
7. Ground Spoiler Interlock Valve Adjustment (Alternate Method)
Figure 505
A. References
Reference Title
27-62-00-800-802 Remove Pressure from the Speed Brake Hydraulic Systems A and B
(P/B 201)
27-62-61-400-808 Ground Spoiler Interlock Valve Functional Test - Rigging Tool
Method (P/B 501)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
SPL-1750 Equipment - Rigging, Interlock Valve Cable, Ground Spoiler
(Part #: C27069-12, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Location Zones
Zone Area
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
D. Ground Spoiler Interlock Valve Adjustment
SUBTASK 27-62-00-860-233
(1) Remove system A hydraulic power.
(a) Do this task: Remove Pressure from the Speed Brake Hydraulic Systems A and B,
TASK 27-62-00-800-802.
SUBTASK 27-62-00-820-006
(2) Adjust the interlock valve cable.
(a) Disconnect the lower slider assembly [80] from the right main landing gear (MLG) upper
torque link.
1) Remove the bolt [81], washer [82], washer [83], and nut [84].
(b) Manually retract and extend the cable assembly [85].
1) Make sure the cable assembly [85] and valve assembly move freely and do not bind.
(c) Install the rig pin S/B-3 from the rig pin kit, SPL-1585.
(d) Remove the lockwire [86] from the checknut [87]on the lower slider assembly [80].
(e) Loosen the checknut [87].
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(64)