曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Reference Description
SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
D. Prepare for the Removal
SUBTASK 27-61-21-860-001
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) Do this task: Spoiler Hydraulic Systems A and B Pressurization, TASK 27-61-00-800-801.
SUBTASK 27-61-21-860-002
(2) Move the speed brake lever to the DOWN position.
SUBTASK 27-61-21-860-003
(3) Do this task: Put the Spoiler Hydraulic systems A and B Back to the Condition Before the
Pressurization, TASK 27-61-00-840-801.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-21
Page 401
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-61-21-860-004
(4) Do this task: Remove Pressure from the Speed Brake Hydraulic Systems A and B,
TASK 27-62-00-800-802.
SUBTASK 27-61-21-480-001
(5) Install the rig pin A/S-3 from the test set rig pin kit, SPL-1585 in the lower crank for the aileron
spring cartridge.
SUBTASK 27-61-21-480-002
(6) Install the rig pin A/S-4 from the test set rig pin kit, SPL-1585 in the aileron bus drum.
SUBTASK 27-61-21-480-003
CAUTION: KEEP THE RIG PIN A/S-14 INSTALLED WHILE THE SPOILER MIXER IS REMOVED. THE
SPOILER MIXER CAN BE DAMAGED IF YOU REMOVE THE RIG PIN.
(7) Install the rig pin A/S-14 from the test set rig pin kit, SPL-1585 in the spoiler mixer
E. Spoiler Mixer Removal
SUBTASK 27-61-21-020-001
(1) Remove the spoiler mixer [1]:
(a) Remove the nut [9], washer [8], washer [7], and bolt [6] that attaches the control rod [5] to
ground spoiler control valve lever [11].
(b) Remove nut [15], washer [14], washer [13] and bolt [12] to disconnect the aileron spring
cartridge [17] from the aileron input crank [16].
(c) Move the aileron spring cartridge [17] to get access to the couplings [27] and coupling [18].
(d) Loosen the nuts [30] on the two couplings [27].
(e) Loosen the nuts [21] on the coupling [18].
(f) Loosen the nut [37] on the coupling [34].
(g) Remove the nuts [2], and washers [3] from the four mounting studs [4].
(h) Remove the spoiler mixer [1] from the airplane.
SUBTASK 27-61-21-020-002
(2) Remove the nuts [30], nuts [21], washers [29], washers [20], bolts [28], bolts [19], couplings [27],
and coupling [18].
NOTE: You must keep the coupling [34] with the spoiler mixer [1].
SUBTASK 27-61-21-020-003
(3) Remove the control rod [5] from the spoiler mixer [1]:
(a) Remove nut [26], washer [25], washer [24], and bolt [23] and disconnect the control rod [5]
from the spoiler mixer [1].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-21
Page 402
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Spoiler Mixer Installation
Figure 401 (Sheet 1 of 5)/27-61-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-21
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Spoiler Mixer Installation
Figure 401 (Sheet 2 of 5)/27-61-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-21
Page 404
Feb 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Spoiler Mixer Installation
Figure 401 (Sheet 3 of 5)/27-61-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-21
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Spoiler Mixer Installation
Figure 401 (Sheet 4 of 5)/27-61-21-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-21
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(38)