曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Page 553
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-62-00-860-073
(12) Make sure the parking brake is released.
E. Speed Brake Antiskid Inoperative Test
SUBTASK 27-62-00-860-074
(1) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-3
Row Col Number Name
E 16 C00196 LANDING GEAR ANTISKID INBD
SUBTASK 27-62-00-860-075
(2) Move the speed brake lever to the ARMED position.
(a) Make sure the SPEED BRAKE ARMED light comes on.
SUBTASK 27-62-00-860-076
(3) Move the TEST SELECTOR switch to the 2 position on the antiskid/autobrake control unit
(AACU).
SUBTASK 27-62-00-860-077
(4) Push the ENABLE/VERIFY and VERIFY buttons on the AACU.
(a) Make sure the SPEED BRAKE ARMED light stays on.
SUBTASK 27-62-00-860-078
(5) Release the ENABLE/VERIFY and VERIFY buttons on the AACU.
(a) Make sure the SPEED BRAKE ARMED light stays on.
(b) Make sure the spoilers do not move.
SUBTASK 27-62-00-860-079
(6) Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-3
Row Col Number Name
E 16 C00196 LANDING GEAR ANTISKID INBD
SUBTASK 27-62-00-860-080
(7) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-3
Row Col Number Name
E 18 C00195 LANDING GEAR ANTISKID OUTBD
SUBTASK 27-62-00-860-081
(8) Make sure the speed brake lever is in the ARMED position.
(a) Make sure the SPEED BRAKE ARMED light comes on.
SUBTASK 27-62-00-860-082
(9) Move the TEST SELECTOR switch to the 1 position on the AACU.
SUBTASK 27-62-00-860-083
(10) Push the ENABLE/VERIFY and VERIFY buttons on the AACU.
(a) Make sure the SPEED BRAKE ARMED light stays on.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 554
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-62-00-860-084
(11) Release the ENABLE/VERIFY and VERIFY buttons on the AACU.
(a) Make sure the SPEED BRAKE ARMED light stays on.
(b) Make sure the spoilers do not move.
SUBTASK 27-62-00-860-085
(12) Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-3
Row Col Number Name
E 18 C00195 LANDING GEAR ANTISKID OUTBD
SUBTASK 27-62-00-860-089
(13) Move the speed brake lever to the DOWN position.
SUBTASK 27-62-00-860-191
(14) Move the TEST SELECTOR switch to the NORM position on the AACU.
F. Put the Airplane Back to Its Usual Condition
SUBTASK 27-62-00-860-090
(1) Do this task: Put the Speed Brake Hydraulic systems A and B Back to the Condition Before
the Pressurization, TASK 27-62-00-840-801.
SUBTASK 27-62-00-860-091
(2) Remove the safety tags and close these circuit breakers:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 14 C01070 FLIGHT CONTROL AUTOSLAT DC 2
C 14 C01068 FLIGHT CONTROL AUTOSLAT DC 1
SUBTASK 27-62-00-410-002
(3) Close this access panel:
Number Name/Location
117A Electronic Equipment Access Door
------------------------- END OF TASK ---------------------------
TASK 27-62-00-820-808
14. Speed Brake Squat Switch Test
A. References
Reference Title
24-22-00-860-811 Supply Electrical Power (P/B 201)
27-62-00-800-801 Speed Brake Hydraulic Systems A and B Pressurization (P/B 201)
27-62-00-840-801 Put the Speed Brake Hydraulic systems A and B Back to the
Condition Before the Pressurization (P/B 201)
32-09-00-860-801 Put the Airplane in the Air Mode (P/B 201)
32-09-00-860-802 Return the Airplane to the Ground Mode (P/B 201)
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 555
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
B. Location Zones
Zone Area
210 Subzone - Control Compartment - Body Station 178.00 to Body
Station 259.50
C. Prepare for the Test
SUBTASK 27-62-00-860-092
(1) Do this task: Supply Electrical Power, TASK 24-22-00-860-811.
SUBTASK 27-62-00-860-093
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(2) Do this task: Speed Brake Hydraulic Systems A and B Pressurization,
TASK 27-62-00-800-801.
SUBTASK 27-62-00-860-094
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(73)