曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

most likely to be held due to weather this is the most realistic box to check. If you do not
want holding patterns, check OFF.
Under the “Plane Data” section of this screen, you can pick the airline you are flying with
from the drop-down box and enter the call sign you would like to be called. When selecting
your call sign, note that a space between the numbers defines how they are spoken. For
example, 6 6 3 would be spoken as six, six, three. If you entered 6 63, it would be voiced as
six, sixty-three. Be sure to pick the type of plane you are flying with: heavy, jet, turbo prop,
or prop. Make your selections now.
The “Deviations” section includes options for setting your heading, altitude, and speed
variation that ATC will allow before issuing you a warning. It is suggested that you leave the
defaults as set, at least initially.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 30
Under the Other section, please make sure Chkpt Ding, Interact with AI, Play Pilot Wavs,
Pilot Auto-Reply, and Tune on Contact all have check marks next to them. Click the OK
button.
Once you have selected the options desired, which are discussed in more detail in the general
section of the manual, click OK and exit this screen.
The main screen now has populated under the Options section with the following:
Another feature of RC is the availability of “Tool Tips”. For example, put your mouse cursor
on the “Alt Restriction” procedure and the following window opens.
The next option available is the “Keyboard”. When you click on this icon, you are presented
with the following screen.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 31
You can customize the key combinations for RC as much as you want. Use whatever keys
you want. Just be careful they do not interfere with the settings of FS itself. For instance, it
would not be wise if you set „g‟ to be the key for repeating last instruction, since you would
lower the gear at the same time. One thing to note: new key combinations do not take effect
until you restart FS.
Click Save and your settings will be applied in the next session of FS. Click Cancel to exit
this window without saving. Click OK and you will be returned to the main screen.
The final screen available in RCv4 under Options is the “Voices” section. The number of
pilots, controllers, and chatter pilots has been significantly increased in RCv4. In addition,
flexibility has been added to allow the user to select which voices they want.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 32
One item to note is that if when a voice is chosen as a pilot or co-pilot, you may not want the
same voice uses as a controller. Make your selections and click the Save option.
Finally, you will notice four icons under the Utilities section of the main menu screen.
“Rebuild Scenery DB” is important to run initially to allow RCv4 to align its database with
the runway/taxiways you have built into Flight Simulator. While the default FS database has
been included, any add-on scenery packages you have added will skew available runways
and/or positioning. It is important to run this utility whenever you modify your scenery as
well to re-synch between where you think you are and where RCv4 thinks you are.
NOTE: If you are running RC on a WideFS configured machine, please read:
The file Makerwys.exe should be located in the main Flight Simulator folder. Run
it and it creates a file r4.csv in the main Flight Simulator folder that contains the runway
information which RC needs for all the active sceneries in your scenery.cfg file.
Now run RC on the WideFS machine.
Radar Contact Quick Start Guide
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 33
On the RC main screen click the „Rebuild Scenery DB‟ button and answer „yes‟
when asked „Is this a WideFS configuration‟.
You will be reminded to run makerwys.exe on the FS machine. If you have done so
click OK.
At the next screen, enter the network path to your main Flight Simulator folder.
RC will now copy the r4.csv file from your Flight Simulator folder into the
RCv4\data folder and will then rebuild the airport database (a4.csv). You will receive
several messages telling you what is happening. Keep clicking OK until the process is
completed.
The second icon “Check for Updates” allows the program to query the Radar Contact server
for software updates to the program. This is a good utility to run after you first load RCv4
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料15(76)