(2)  
Access Panel
 317AL APU Access Door
 318AR APU Access Door

 C.  
Procedure

 S 014-002
 (1)  
Do this task: "Flow Divider and Dump Valve Removal" (AMM 49-31-00/201).

 S 024-020

 (2)  
Remove the fuel manifolds (5 and 7) and the nozzle adapters (3 and 6):

 (a)  
Disconnect the fuel manifolds (5 and 7) from each fuel nozzle adapter (3 and 6).

 (b)  
Remove the fuel manifolds (5 and 7).

 (c)  
Install plugs on the fuel manifold openings to prevent contamination.

 (d)  
Remove the two transfer tubes (8) from each fuel nozzle adapter (3 and 6).

 NOTE: There is a total of 28 transfer tubes.
____
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-31-04
 ALL  ú ú 01 Page 401 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SEE A
1.
 GASKET

2.
 SEAL COVER

1. GASKET
FWD  3. FUEL NOZZLE
2. SEAL
ADAPTER COVER
4. BOLT
8. TRANSFER TUBE
6. BOTTOM
FUEL NOZZLE

9. PACKING ADAPTER
7. PRIMARY FUEL MANIFOLD
5. SECONDARY FUEL MANIFOLD
6 O'CLOCK POSITION
A
Fuel Manifold and Nozzle Adapter Installation Figure 401
F58313
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-31-04
 ALL  ú ú 02 Page 402 ú Feb 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (e)  
Remove the 28 bolts (4) that attach the fuel nozzle adapters (3 and 6) to the gas generator case.

 (f)  
Remove the 14 fuel nozzle adapters (3 and 6).

 (g)  
Remove the seal cover (2) and the gasket (1) from each fuel nozzle adapter. 1) Discard the gaskets.

 S 434-010
 (3)  Install caps on the nozzle adapter openings to prevent contamination.
 TASK 49-31-04-404-011
 3. Fuel Manifold and Nozzle Adapter Installation (Fig. 401)
_____________________________________________
 A. References
 (1)  
AMM 49-31-00/201, Flow Divider and Dump Valve

 B.
Parts ~.............................................................................. | AMM | | AIPC | ................. NOMENCLATURE ............................ | FIG | ITEM | | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | Gasket | 49-31-04 | 01 | 7 | | | 3 | Inlet Nozzle Assembly (Fuel | | |45, 50,| | | | Nozzle Adapter) | | |60, 65,| | | | | | | 80 or | | | | | | | 85 | | | 5 | Nozzle Manifold Assembly | | | 115 | | | | (Secondary Fuel Manifold) | | | | | | 6 | Fuel Nozzle Assembly (Bottom Fuel | | | 90 or | | | | Nozzle Adapter) | | | 95 | | | 7 | Nozzle Manifold Assembly (Primary | | | 115 | | | | Fuel Manifold) | | | | | | 9 | Packing | | | 110 | 2.......….......…...................................…...........…......….......1

 C.
Access

 (1)  
Location Zone 317 APU Compartment-Circumference of Gas Generator Case, LH 318 APU Compartment-Circumference of Gas Generator Case, RH

 (2)  
Access Panel
 317AL APU Access Door
 318AR APU Access Door

 D.
Procedure

 S 034-012
 (1)  Remove the caps and the plugs from the manifold and the adapter openings.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-31-04
 ALL  ú ú 01 Page 403 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 424-021
 (2)  Install the fuel manifolds (5 and 7) and the nozzle adapters (3 and 6):
 CAUTION:_______BE CAREFUL WHEN YOU TOUCH THE FUEL NOZZLES. MAKE SURE YOU USE CLEAN LINTFREE COTTON GLOVES WHEN YOU TOUCH THE COMPONENTS. FINGERPRINTS ON AN OPENING CAN CAUSE AN UNSATISFACTORY FUEL SPRAY.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 2(51)