(2)  
Access Panel
 317AL APU Access Door
 318AR APU Access Door

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-81-01
 ALL  ú ú 01 Page 403 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 C. Procedure
 S 434-023
 (1)  
Install the acoustic lining and the inner exhaust duct in the outer exhaust duct (6):

 (a)  
Put the inner exhaust duct and the acoustic lining in the outer exhaust duct (6).

 (b)  
Install the bolts (1), the washers (3 and 5), the bushings (2), and the nuts (4) that attach the inner duct to the outer duct. 1) Tighten the nuts (4) to 360-440 pound-inches (40.7-49.7

 N.m).
 S 424-024
 (2)  
Install the outer exhaust duct (6):

 (a)  
Put the exhaust duct assembly in its position in the fuselage.

 (b)  
Connect the outer exhaust duct (6) to the APU: 1) Connect the outer exhaust duct (6) to the APU with the V-band clamp (8). 2) Lightly hit the outer edge of the clamp (8) with a mallet

 made of rubber or leather to engage the clamp. 3) Tighten the clamp (8) to 45-55 pound-inches (5.1-6.2 N.m). 4) Do the above two steps again until the clamp (8) nut stays
 tightened at the specified torque value.
 (c)  Connect the drain line (7) to the outer exhaust duct (6).
 S 414-018
 (3)  
Close the APU access doors:

 (a)  
Do a visual check of the EGT bus bars: 1) Make sure the bus bars are not damaged. 2) Make sure no metal parts touch the bus bars. 3) Make sure the bus bars do not touch each other.

 (b)  
Disengage the support rods for the APU access doors.

 (c)  
Put the support rods in the clips on the inner side of the APU access doors.

 (d)  
Make sure the insulation covers correctly attach to the APU compartment firewall.

 (e)  
Close the APU access doors.

 (f)  
Close the latches on the APU access doors.

 S 864-019
 (4)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:

 (a)  
P83 Panel, E8 Aft Equipment Center
 1) APU PRIMARY CONT

 (b)  
P6 Main Power Supply Panel
 1) 6K18 APU ALTN CONT

 S 864-020
 (5)  Remove the DO-NOT-OPERATE tag from the APU control switch on the P5 panel.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-81-01
 ALL  ú ú 03 Page 404 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 APU TURBINE EXHAUST DUCT - INSPECTION/CHECK
___________________________________________
 1.  General_______
 A.  This procedure contains the task to examine the exhaust duct nozzle for cracks.
 B.  You must remove the outer exhaust duct assembly to get access to the exhaust duct nozzle.
 TASK 49-81-01-206-004
 2.  Exhaust Duct Nozzle Inspection (Fig. 601)______________________________
 A.  References
 (1)  
49-81-01/401, APU Outer Exhaust Duct

 (2)  
IPC 49-81-51 Fig. 1

 B.  
Access

 (1)  
Location Zone
 317 APU Compartment-Exhaust Outlet, LH
 318 APU Compartment-Exhaust Outlet, RH

 (2)  
Access Panel
 317AL APU Access Door
 318AR APU Access Door

 C.  
Procedure

 S 016-001
 (1)
Remove the outer exhaust duct for the APU (Ref 49-81-01/401).

 S 216-002

 (2)  
Examine the exhaust duct nozzle for cracks.

 (a)  
Axial cracks that start at the aft end of the exhaust duct nozzle are permitted if they do not come together.

 (b)  
Axial cracks that come together are not permitted.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 2(139)