曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 B.  The duct assembly is referred to as the outer exhaust duct.
 C.  The exhaust duct assembly is removed through the exhaust duct opening in the rear of the fuselage. The exhaust duct is removed as an assembly. The acoustic lining and the inner exhaust duct are removed from the outer exhaust duct after the removal from the airplane.
 D.  The outer exhaust duct is connected to the exhaust outlet of the APU engine. You can get access to the outer exhaust duct through the APU access doors.
 TASK 49-81-01-004-001
 2.  Outer Exhaust Duct Removal (Fig. 401)__________________________
 A.  References
 (1)  
IPC 49-81-51 Fig. 1

 B.  
Access

 (1)  
Location Zone
 317 APU Compartment-Exhaust Duct, LH
 318 APU Compartment-Exhaust Duct, RH

 (2)  
Access Panel
 317AL APU Access Door
 318AR APU Access Door

 C.  
Procedure

 S 864-002
 (1)  
Make sure the APU control switch on the P5 panel is OFF and attach a DO-NOT-OPERATE tag.

 S 864-003

 (2)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P6 Main Power Supply Panel
 1) 6K18 APU ALTN CONT

 (b)  
P83 Panel, E8 Aft Equipment Center
 1) APU PRIMARY CONT

 

 S 014-004
 (3)  
Open the APU access doors:

 (a)  
Open the latches on the APU access doors.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-81-01
 ALL  ú ú 01 Page 401 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

SEE A
6. OUTER EXHAUST DUCT
8. CLAMP
1.
 BOLT

2.
 BUSHING

7. DRAIN LINE
A
5. WASHER
3.
 WASHER

4.
 NUT

B
APU Outer Exhaust Duct Installation Figure 401
ACOUSTIC LINING (REF)
INNER EXHAUST DUCT (REF)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 49-81-01
 ALL  ú ú 01 Page 402 ú Feb 10/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (b)  
Open the APU access doors.

 (c)  
Engage the support rods for the APU access doors.

 S 024-021
 (4)  
Remove the outer exhaust duct (6):

 (a)  
Disconnect the drain line (7) from the outer exhaust duct (6).

 (b)  
Hold the exhaust duct assembly.

 (c)  
Remove the V-band clamp (8) that connects the outer exhaust duct (6) to the APU.

 CAUTION: MAKE SURE YOU SUFFICIENTLY HOLD THE EXHAUST DUCT ASSEMBLY.
_______ THE DUCT ASSEMBLY WEIGHS APPROXIMATELY 95 POUNDS (43.1 KILOGRAMS). DAMAGE TO THE DUCT ASSEMBLY CAN OCCUR IF THE ASSEMBLY FALLS TO THE GROUND.
 (d)  
Move the exhaust duct assembly aft.

 (e)  
Remove the exhaust duct assembly from the airplane.

 S 034-022
 (5)  
Remove the inner duct and the acoustic lining from the outer exhaust duct (6):

 (a)  
Remove the bolts (1), the washers (3 and 5), the bushings (2), and the nuts (4) that attach the inner duct to the outer duct.

 (b)  
Remove the inner duct and the acoustic lining from the outer exhaust duct (6).

 TASK 49-81-01-404-012
 3.  Outer Exhaust Duct Installation (Fig. 401)_______________________________
 A. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 6 | Duct Assembly (Outer Exhaust Duct)| 49-81-51 | 01 | 30 | 2.......….......…...................................…...........…......….......1
 B. Access
 (1)  
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機載輔助動力 2(138)